whats your favorite spinnerbait rod? just looking for some opinions throw in a few if you want ;D
I have a All Star Pro Series 6'6" MH rod that I use for spinnerbaits. It does O.K. for me.
I'm glad you posted this question because I've been wondering the same thing. ALL of my rods are at least 7'. I started buying 7' about 20 yrs ago and never looked back. I don't have a dedicated spinnerbait rod (only lure rod I don't have) but would like to get one. Most of the ones I look at are 6'6 to 6'9. A few are over 7' but it seems most are under.
Whats the reason for so many being under 7'?
The brand to buy will be easy since it HAS to be a Loomis.
Loomis 844gl3 and dobyns 734.
johnny morris signature series 6-6 mh.
I love my Kistler Mg 6'9" MH APC for both spinnerbaits and buzzbaits.
QuoteMost of the ones I look at are 6'6 to 6'9. A few are over 7' but it seems most are under. Whats the reason for so many being under 7'?
spinnerbait rods run a little on the short side because accuracy is much more important than distance with spinnerbaits. the shorter the rod, the more accurately you can place the spinnerbait. shorter rods are also easier to work under overhanging limbs and such.
as for my favorite, i've discovered a lot of rods will work decently with spinnerbaits BUT the g.loomis SBR-713C is the best.
I use a shimano crucial MH xfast 6'10. Use it for spinnerbaits and buzzbaits. I love it.
QuoteQuoteMost of the ones I look at are 6'6 to 6'9. A few are over 7' but it seems most are under. Whats the reason for so many being under 7'?spinnerbait rods run a little on the short side because accuracy is much more important than distance with spinnerbaits. the shorter the rod, the more accurately you can place the spinnerbait. shorter rods are also easier to work under overhanging limbs and such.
as for my favorite, i've discovered a lot of rods will work decently with spinnerbaits BUT the g.loomis SBR-713C is the best.
x2 on the reason why spinnerbait rods are short.
6' 4" Team All Star.
I use my MBR783C IMX.
My favorite is my custom loomis sbr812 that I built. I also have a 6'6" med carrot stix that I like for spinnerbaits as well. Caught a 40" musky on a spinnerbait about two hours ago using it so it definitely holds up fine!
For 3/8-1/2 oz I use a Loomis GL3 CR724. 3/4-1 oz I use a St Croix Premier PC66HF (6'6" hvy/fast).
QuoteI use a shimano crucial MH xfast 6'10. Use it for spinnerbaits and buzzbaits. I love it.
got the same rod but use it for jigs and worms? didnt even think of using it for spinnerbaits. thought the tip was a lil too stiff for that.
As of today it's a 7' MH Avid
QuoteAs of today it's a 7' MH Avid
x2 great spinner bait rod, but I use it for Jig and worm. Although I am thinking of getting the 6'6" MH as a dedicated spinnerbait rod.
Mine is a falcon pistol grip rod 6 foot MH action perfect for accurate cast to stumps,weeds under limbs etc etc
I like the Quantum PTC666FKV, Kevin VanDam Model. The short handle provides pinpoint accuracy when throwing a spinnerbait into tight, heavy cover. The soft tip a fast taper allows for better feel of the baits action.
And more recently the Quantum PTC6106FKV, also a Kevin VanDam Model. For big spinnerbaits in clear water, the four additional inches in this rod provide excellent casting distance. This one has turned into a very nice swim jig and worm rod as well.
A-Jay
This spring I've been using a Kistler He59MHC, and I've been super happy...I've never had so much fun roll-casting in my life.
It used to be a Shimano V-Rod 6'10" MH rod (Very light tip = great for roll casting). But now it is the new Quantum Tour KVD Spinnerbait rod 6'10". It is very similiar to the V-Rod but has split foam grips and a nice tip to it. Great rod.
Quote...now it is the new Quantum Tour KVD Spinnerbait rod 6'10". It is very similiar to the V-Rod but has split foam grips and a nice tip to it. Great rod.
i've never heard of this rod, only the tour KVD crankbait rods. can you point me to where i can find out more information? thanks.
These rods are only available on Quantums website at this time. I guess it is sort of a trial run. They have 2 spinnerbait rods by KVD (6'10" and 7'4") and a few of the other prostaffers have developed technique specific rods as well (ie Rojas - Frog rod, Klein - Flipping stick, Hackney flipping stick, etc.) They are a little pricey but I have two of the 6'10" spinnerbait rods and they are the closest I have found to the Shimano 6'10" V-rod. I've been impressed so far with them. Looks like Quantum is trying to get back in the game. Time will tell though.
willzx225, thanks for the info on the custom quantum rods...very interesting. is your 6'10" spinnerbait rod made out of glass or graphite?
here's the link for anyone who might be interested:http://www.quantumfishing.com/CustomShop/TourRods.htm
Loomis MBR 783 GLX for closer range, 3/8 to 1/2 oz. baits. MBR 843 GLX for burning spinnerbaits in open water, and MBR 844 GLX for 3/4 and 1 oz slow rollers...
My dedicated rod is an Avid AVC70MF matched up with
a Shimano Chronarch and Yo-Zuri Hybrid #12.
8-)
open water/ long casts = 7' M st croix premire
Cover/short casts = 6' MH st croix Avid
Frank- It is a graphite rod. It has the same colors and grip as the Crankbait rods but it is all graphite instead of composite.
Castaway SB3 6'2" MH moderate action.
I have 2 dedicated spinnerbait rods. Bother are made by EddieTaylor on this board.
One is a med St Croix blank 6'10" for open water
The other is a 5'6" med Shikarii blank