fishing spot logo
fishing spot font logo



Senko Mj Rig 2024


fishing user avatarcottny27 reply : 

Tried this senko with blade rig this past weekend and destroyed bass until I lost the screw lock/spinner.  It wasn't planned so I didn't bring extra.  Has anyone tried this setup with a Zoom Fluke?  Should be deadly.  


fishing user avatarChoporoz reply : 

I'd never heard of it....figured I'd be afraid of losing spinners left and right......but after just minimal googling, I think this is something that I NEED to try.  Thanks.


fishing user avatarcottny27 reply : 

If you like senkos its a NEED.  I had a 1/16th jig head with an exposed hook and a larger willow blade on mine.  The norm is a smaller Colorado and weightless Texas rigged hook, but I only can see that running at the very top of the water column.  


fishing user avatarcottny27 reply : 

Or slip a senko or fluke on this:

http://www.***.com/Sworming_Hornet_Fish_Head_Spin/descpage-SHFHS.html

 

could be deadly.


fishing user avatarAlonerankin2 reply : 

Swimming Hornets/ Superflukes = Fun Fishing, to be sure. I use those on Cumberland & in Fl. 3/4 Chartruse heads & 5/0 Gammys.. They come in different sizes as well.


fishing user avatarrboat reply : 

What is this rig? I am not familiar of what you are talking about. Could you post a picture or a link so I could see it. Thank You.


fishing user avatarJ Francho reply : 

You screw a hitchhiker into the tail end of a senko.  Attached to the hitchhiker is a swivel and spinnerbait blade.

 

IMG_4820_zps10b7aea0.jpg


fishing user avatarrboat reply : 

That sounds pretty neat. Just a little added attraction for the old senko. I will have to try this. Thanks.


fishing user avatartcbass reply : 

Anyone got a full pick of this?


fishing user avatarComfortably Numb reply : 

The attraction of a Senko is it has no attraction :)


fishing user avatarSam reply : 

I have them but have not used them.

 

Plan to do so next year.

 

Pros love the set up and thanks to Timmy Horton for letting the cat out of the bag regarding the setup.

 

Sam


fishing user avatarBassguytom reply : 

I'm in! I have no idea what it is but looks very intresting. How many different ways can you catch a bass? I love this place!


fishing user avatargulfcaptain reply : 

I use the 5" Yum Dingers (cut off a small piece of the tail to insert the centerpin) since they are a little more durable as well as an 1/8-3/16 oz tungsten worm weight pegged rigged weedless and seems to work well especially in scattered weeds and use a #3 willow.  Think the most expensive part of the rig is the owner twistlock center pins.  The swivels, blades, split rings are pretty cheap though.  Works really well though with either the senko or dinger.


fishing user avatarcottny27 reply : 

Just came back from BPS and bought my Twist locks, ball bearing swivels, and XPS Indiana blades.  Plan on trying this with a super fluke Sunday.  We shall see.  Works really well on a senko.


fishing user avatarsmalljaw67 reply : 

I tried it on the fluke and unless you are fishing it on a scrounger head or something similar then it doesn't do a good job. For those wanting to make their own MJ rigs, buy some size #10 crane swivels, medium size hitch hikers and size #3 willow leaf blades or size #3 Indiana blades and a pack of split rings and you can make a bunch in no time.


fishing user avatarpbizzle reply : 

I remember reading about something like this in an old issue of Bassin'. He'd bite the tail of a lizard and replace it by screwing a colorodo blade into the body. I remember the spinner that he use was made by Mesu Baits and was called the Dingle Berry. I really want to buy some just so I can say I caught a bass on a dingle berry…


fishing user avatarprimetime reply : 

Every time I rig up a senko with a willow blade to swim through Hydrilla, I am temped to dig deep into my box and pull out a few packs of the old school creme midget crawler pre rigged worms with the helicopter blades like on a spy bait. I think that was the first plastic worm I used when I was a kid and caught hundreds of bass on that rig to go along with the Mepps Comet Minnow and Countdown Rapala, lures I never use anymore....


fishing user avatar1201vilbig reply : 

Rego Tackle is making the front spinner/bead rigs (like the old Creme) with an EWG hook. Very well made with the majority of the bites for me coming on the fall.


fishing user avatarprimetime reply : 

Thanks for the info I have never heard of Rego Tackle but I will check them out. I am thinking about throwing the Creme worm rigs on my next trip since I used to catch fish on that rig when I was first into freshwater fishing at the age of probably 7-8 and for 2-3 years, I don't think I used much of anything else and I remember doing really well with that rig even though it does look a bit silly, but then again, who would have thought we would be looking at $15 spy baits which are kind of the same look/vibration which may be why they work well at times. Once I learned how to fish a Culprit with a Keeper hook and it never caught weeds that then became my favorite worm for the next few years until the Power worm came onto the market and that was a gamechanger for sure....Tough to beat a power worm to this day for a ribbon tail....


fishing user avatarChrisD46 reply : 

This is all you need to know : Talon Custom Lures - Worm Blades available at TW .

They offer Colorado , Indiana and Willow blades - all good for a 5 inch Senko (or similar) stick worm.

This is the definitive MJ Rig .


fishing user avatarJ Francho reply : 

I wouldn't spend one single penny on Talon anything.

 

http://www.bassresource.com/bass-fishing-forums/topic/17299-prop-jig/?hl=+talon%20+lures


fishing user avatarChoporoz reply : 

Thanks, JF.   I'd never seen that.  I'd considered buying the Talon mj's when this thread started.  But, since I was placing an order to Barlows to start making stuff this winter, I added on the mj pieces.  Very glad I did.

 

BTW, I spent a fair amount of time last night putting some together.  Did it outside since I wanted to have a cigar while I did it.  Even with my clumsy fumblefingers in the near darkness I was able to put a half dozen together without bending or losing more than 3 or 4 split rings....lol.  I plan to try and throw one this weekend...if it isn't snowing, anyway  :)

 

 

 

added:

 

 I got:

Split Rings - Standard (Size 3 - 100 Count Pack)  $4.59

Nickel Willow Spinner Blades Smooth Finish (Size 3 - 10 Count Pack)  $1.39

Barrel Swivels (Size 10 - 24 Count Pack, Black)  $1.59

Lok-On Coil Keeper (25 Count Pack)  $2.95

Edited by Choporoz
fishing user avatarJ Francho reply : 
  Quote

 

But, since I was placing an order to Barlows to start making stuff this winter, I added on the mj pieces.  Very glad I did

 

Good move! You can make your own with better quality parts, as well.  Plus, I already have hitchhikers and BB swivels in my box, and probably a few dozen wasted spinnerbaits that I scavenge blades from.


fishing user avatarprimetime reply : 

I was just cleaning out my tackle and found a few spinnerbaits missing blades and realzized it was because I wanted a smaller colorodo or Indiana blades and I used to only carry willow blades for some reason (I think that is how I saw Timmy Horton do it) but I started to buy Hitchikers in bulk and also swivels and blades, and I have had some success with using colored blades kind of like how Jimmy Houston would always use that orange blade on his spinnerbaits.

 

I use this rig more than I realize, it is great for covering water especially shallow water filled with hydrilla or Millfoil, as I love chucking a 6" senko or Dinger with a blade attached and also a few Nail weights to modify tail action and swining based on how active the fish are, but I don't mind losing a blade or two every other fish since it can go where spinnerbaits can't.

 

I would never spend the money to pay for Owner centering pins or pre rigged MJ rigs, I find a standard Hitchiker works fine with the same swivels they use for spinnerbaits, and for blades, they are actually cheap in packs of 25 or 100. I have started trying larger Hammered Colorodo blades but have not had success yet, also tried the hatchet blades as well but not done experimenting....Tackle Warehouse sells some Jigheads with willow blades underneath them or underspins which I like even though they are expensive for also rigging a senko, and sometimes I put the blade on the gap of the hook when texas rigging instead of having it behind, but it picks up more weesds imo when under the worm....I like a worm that is way too soft with too much salt, and tears after one fish for this rig, they swim so much better and a nail weight in the right place can give it a crazy whipping action.


fishing user avatar5fishlimit reply : 
  On 11/13/2014 at 1:32 AM, J Francho said:

I wouldn't spend one single penny on Talon anything.

http://www.bassresource.com/bass-fishing-forums/topic/17299-prop-jig/?hl=+talon%20+lures

Thanks, that was some good reading right there. LOL!


fishing user avatarChrisD46 reply : 

I just read the history of Talon with some of the members here : For someone who just wants to try the MJ rig in small quantities without buying the individual pieces in larger quantities to construct - Talon (and others like them making the MJ rig) are a good option . If you REALLY like it then I see no reason why you can't make yourself in bulk then ...In the end it's your personal business who you buy from .


fishing user avatarJ Francho reply : 

We don't take companies threatening members with lawsuits lightly.  Whenever that company is brought up, I expose her behavior towards potential customers.


fishing user avatarInflatable Raft Bum reply : 

I viewed the post you linked to, i fail to see anything proprietary with the rig, unless i viewed the wrong link or something.

That would be like claiming you had a patent on the freaggin' Texas Rig worm, LOL


fishing user avatarChrisD46 reply : 
  On 11/13/2014 at 9:56 PM, J Francho said:

We don't take companies threatening members with lawsuits lightly.  Whenever that company is brought up, I expose her behavior towards potential customers.

After further consideration - I agree with you ... What Talon did is basically assemble hardware and sell it - me thinks thou (Talon) protest too much !


fishing user avatartgat77 reply : 
  On 11/7/2014 at 7:41 AM, Comfortably Numb said:

The attraction of a Senko is it has no attraction :)

But it sure does catch alot of bags across the country lol


fishing user avatartcbass reply : 
  On 11/7/2014 at 4:23 AM, J Francho said:

You screw a hitchhiker into the tail end of a senko.  Attached to the hitchhiker is a swivel and spinnerbait blade.

 

IMG_4820_zps10b7aea0.jpg

 

 

Wouldn't you lose that to a bass pretty quickly?


fishing user avatarJ Francho reply : 

Probably.  I don't use the rig.


fishing user avatarh20-50 reply : 

I do something similar except I use a Zappo Twin blade and slide the hook point into the line hole on the twin blade.  The twin blades are then sitting under the bottom of the worm attached to the hook.  You'll never lose a blade, unless you lose the hook! Works like a charm.  You can even cut off one blade if you want a single blade setup, FYI Zappo twin blade rigged to an Owner beast hook keel weighted, and a 4.8 Keitech, DEADLY!


fishing user avatarJ Francho reply : 
  On 4/6/2017 at 8:56 PM, h20-50 said:

FYI Zappo twin blade rigged to an Owner beast hook keel weighted, and a 4.8 Keitech, DEADLY!

 

Dude, you're on the internet!  Shhhhhhhh......... ;) o


fishing user avatarh20-50 reply : 
  On 4/6/2017 at 8:57 PM, J Francho said:

 

Dude, you're on the internet!  Shhhhhhhh......... ;) o

Dang it!  I typed that out loud again!!


fishing user avatarKDW96 reply : 
  On 4/6/2017 at 8:56 PM, h20-50 said:

I do something similar except I use a Zappo Twin blade and slide the hook point into the line hole on the twin blade.  The twin blades are then sitting under the bottom of the worm attached to the hook.  You'll never lose a blade, unless you lose the hook! Works like a charm.  You can even cut off one blade if you want a single blade setup, FYI Zappo twin blade rigged to an Owner beast hook keel weighted, and a 4.8 Keitech, DEADLY!

 

Pics or it dont exist. : )


fishing user avatarChrisD46 reply : 
  On 11/13/2014 at 2:20 AM, Choporoz said:

Thanks, JF.   I'd never seen that.  I'd considered buying the Talon mj's when this thread started.  But, since I was placing an order to Barlows to start making stuff this winter, I added on the mj pieces.  Very glad I did.

 

BTW, I spent a fair amount of time last night putting some together.  Did it outside since I wanted to have a cigar while I did it.  Even with my clumsy fumblefingers in the near darkness I was able to put a half dozen together without bending or losing more than 3 or 4 split rings....lol.  I plan to try and throw one this weekend...if it isn't snowing, anyway  :)

 

 

 

added:

 

 I got:

Split Rings - Standard (Size 3 - 100 Count Pack)  $4.59

Nickel Willow Spinner Blades Smooth Finish (Size 3 - 10 Count Pack)  $1.39

Barrel Swivels (Size 10 - 24 Count Pack, Black)  $1.59

Lok-On Coil Keeper (25 Count Pack)  $2.95

* Also try downsized version using a 4" stick worm of your choice with a #2 or #2.5 willow or Colorado blade - works great when bass want a slightly smaller profile !!




7403

related Fishing Tackle topic

Roboworm Storage?
Favorite Hardbaits?
Soft Plastics
Tap.....Tap
Cutting fishing line
Chatter Baits
Lily Pads
Sunglasses
What's your best finesse tactic?
What Lure Is This?
Discontinued Items
New At Winter Bass Fishing - What Clothes Do I Need?
Zoom Crankbaits
Getting Skunked? Try Ned.
Rage Tail 10" Anaconda
Jig Trailers
How do you texas rig?
Compact jigs
Best big worm? 9-12 inch
Minimalism...



previous topic
Does anyone else lure hunt? -- Fishing Tackle
next topic
Roboworm Storage? -- Fishing Tackle