Snaps And Swivels 2025

Marquis Cooper reply :

Anyone use Snaps and Swivels? I bank fish and as you guys know i switch bait a lot. I thought about using snaps and swivels. Good idea?

SirSnookalot reply :

Snap/swivels, no.

A snap is fine, without is fine too, whatever your choice is.

HoosierHawgs reply :

I don't use them because I don't change that often. If you want to change up without relying then yes. It will save you money on line. Just buy quality snaps so you don't lose fish.

John G reply :

I use Bill Norman Speed Clips for hardbaits.

Smokinal reply :

i like tying direct. i find snaps/swivels catch too much grass. i also like my plastics to appear as natural as possible. i do use a snap on my crankbait rod but not on anything else. once you make up your mind that you are going to tie direct, you realize it only takes a second to retie and you lose a whole 3 inches of your line.

doyle8218 reply :

I use Bill Norman and Molix Hyper Snaps for some hard baits and Jika Rjgs.

WIGuide reply :

There's nothing wrong with doing it. Be sure to use decent ones though, the cheap ones at wallie world will fall apart. I don't use them much anymore, but I used to use them all the time. I'd pick up some BPS fast lock ones with a ball bearing swivel attached. If you get a different brand, look for ones with that style of design to prevent them from falling/pulling apart.

jitterbug127 reply :

I use snaps but not swivels

Felix77 reply :

I want to like the idea. I have used all different kinds and I have always resulted in going back to tying for each change. You would be surprised how fast you can tie a knot after enough practice. I also bank fish a lot.

Fishes in trees reply :

Snaps with a ball bearing swivel on in-line spinners, like a Mepps. Other than that, not so much.

I have a few jigging spoons and heavy blade baits. I don't fish them very often. I do have ball bearing swivels attached to them via a split ring. Back when I was fishing BFL's as a co-angler, some guy in a tackle shop told me it was a good idea.

Cranks - not so much, I find it easier just to re-tie.

Raul reply :

I use snaps, swivels and snap & swivel combination or direct tie depending upon the bait I´m throwing.

Now if you are going to try any of them as an excuse for not tying knots and forget about checking the condition of your line on a regular basis then the absolute worst thing you can do is precisely that.

MCS reply :

Hardbaits yes, plastics no. Bill Norman speed clips are good, or plain snaps....skip the swivels.

kcdinkerz reply :

I use then for spoons and. Inline spinners. If they were more weedless I would use them for other things to. But doing that makes ya lazy, might forget how to tie knots lol

Insanity reply :

I use kvd brand its just faster. And less line wasted. I've had to put backing line on reels before so I no those 3 or 4 inches add up fast.

I read an article once that said if your going to use a snap. Remove the split ring. Or the two together would effect the action of the bait.

It makes sense how ever I never do it.

MainelyBASS reply :

Hardly ever for me, but if I do its just a snap. I personally don't want to add another chance of a failure to happen if I dont need to. When tying straight, only the knot is between you and landing a fish. With a snap, the knot could fail, and the snap could fail. Funny/not so funny story about a snap failing at the wrong time-- I was striper fishing and the guy next to me hooks up with a near 50" fish but needs to climb down rocks to land it. He asks me to hold the rod once he has the fish worn out and I oblige. At this point the fish is belly up crashing into the rocks and he hands me the rod. Mid way through his climb to the bottom, the fish rolls over and makes a short run, in the process straighten's out the snap and off he goes. Not only did I lose the fish, but he had a $30 lure hanging out of his mouth as well. I would never second guess this mans approach as he is a well know striper master, so as he told me, that was the first time that it has ever happened to him.

BassAddict'18 reply :

If you are in a situation where you either dont want to eat up your line changing lures a lot or you want to quickly change baits on the spot and dont have that many rods at hand then a snap swivel can be a great thing. If you are lucky enough to have 4-5 rods on hand then you shouldnt run into that problem and can just tie your baits straight on with no worries.

primetime reply :

If using Fluorocarbon leader I use a Invisiswivel as I trust the improved clinch knot better than tying direct to braid. I use snaps but when I do I only use the best quality, Spro and Worth are my favs...

SirSnookalot reply :

Have seen a few posts about inexpensive snap/swivels breaking or opening. If it does happen, IMO rare, what causes failure is probably due more to user error rather than quality. Like every component of the chain having the drag set properly takes the pressure off, nothing should break. From my observation experienced fishermen don't use them any way, it's the the fisherman that's fishing for smaller fish and gets smashed by one much larger and doesn't know how to handle it, locks the drag and something has to give. The advantage of using better quality is not the issue of strength, but spin. A barrel swivel with snap or not doesn't spin too much, the crane slightly better, power swivels are decent and BB tops the list. I've recently changed to D.A.M. BB, work every bit as well as my Sampos, better price.

I use a #2 swivel rated at 40# with a duolock attached, the reason I use this size is the smaller the swivel the better control over line twist. I only use this set up for barracuda fishing, nothing else. I land these fish not based on the quality of each individual component, but in knowing how to do it. I'm not the only one, we have slew of people doing exactly what I'm doing and they land them too.

bassman201 reply :

I don't like using either. Using them can affect the actoin of your lure as well as get caught up in the grass and weeds. It doesn't take all to long to retie and it can actually help because there is less chance of fraying or weaking your line.

Marquis Cooper reply :

You guys make great points. I think i'll give it a try just for the sake of trying it. Snaps but no swivels Is what I get from the comments. I do not have a problem tying the line on directly, was just looking for a faster way to get it done. Ultimately I may just continue to tie on direct.

J Francho reply :

I use snaps and/or swivels, but NEVER snap-swivels.

WPCfishing reply :

I have never used them. I like knowing the only thing between me and the bait is line. I also like the feedback from tying directly to my baits.

I wouldn't even consider using a swivel or snap.

Raul reply :

I do use snap-swivel combination, specifically for in-line spinners and for spoons, those things twist the line with gusto.

If you are going to purchase snaps, swivels and snap-swivels ..... for crying out loud, purchase good quality ones !

Jolly Green reply :

I use a swivel with 18" - 24'' of fluoro leader tied direct to my flukes. If I'm using a snap, it's a Duo-Lock snap at the end of a wire leader with a BB swivel, nice for combing a lipless crank or inline spinner through pike-infested waters.

the reel ess reply :

Never again will I use a snap or swivel unless I KNOW there are no big fish where I am, like a creek. I had a snap straighten out on me with the largest fish so far this season. I should have tied it on, but I really didn't think the fish would be killing my presentation because they hadn't been biting well. I was experimenting.

bigbill reply :

I use the ball bearing locking snap swivels. I have a standard barrel swivel on the end of my Carolina rig I have pre rigged plastics that I change out quickly. I get more swinging smoother side to side movement on my hardbaits too. I can tie knots plus the ease of changing baits.

You need to use quality bearing locking snap swivels.

SirSnookalot reply :

On 5/23/2015 at 9:47 AM, bigbill said:

I use the ball bearing locking snap swivels. I have a standard barrel swivel on the end of my Carolina rig I have pre rigged plastics that I change out quickly. I get more swinging smoother side to side movement on my hardbaits too. I can tie knots plus the ease of changing baits.

You need to use quality bearing locking snap swivels.

What many do here is have pre rigged leaders (wire usually) attached to their lures for an easy change. I do it myself with a dedicated rod and my dedicated lures for 1 species. The snap/swivel is not on the lure, I don't care for that extra hardware. The quality I see use ranges from the cheapest money can buy to more expensive BB/ duolock ones that I use. To my memory I don't recall seeing one open, break or fail in any way, regardless of the quality being used. I use BB (I'm a bit more anal about this than many here) as an aid in reducing line twist, the smaller seems to work better, my size is #2 40-50# depending on brand. Too small for bigger fish but for 40-50" ones that hit at 30 mph, it's been the perfect set up for me.

With a failure rate that I see close to zero, if failure should occur I'd bet 99% of the time it's my user error.

9228

Snaps And Swivels 2025

related Fishing Tackle topic

previous topic

next topic

most viewed Fishing Tackle topic