Masterbuilt MB20101114 Universal Leg Extension Kit, Black review and price compare 2025
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
Product overview
| Brand | Masterbuilt |
| Model Name | Universal Leg |
| Color | Black |
| Item Dimensions LxWxH | 21.46 x 22.24 x 9.84 inches |
| Fuel Type | Electric |
product features
- by entering your model number.
- Raises the smoker 10-inches for easier access
- Fits all Masterbuilt digital electric smokers
- Rear-mounted wheels make moving the smoker easy
This fits your .
From the manufacturer
Choose the right tool.
|
|
|
|
|---|---|---|
SmokeWhether you’re a beginner or a competition-ready pro, we have the right tools to easily craft your backyard masterpiece. Pick your preferred fuel source and start the journey. | AccessorizeCustomize your product with a variety of accessories designed to enhance your smoking and frying experience. | Fry, Boil, or SteamMasterbuilt, who invented the world’s first indoor 3-in-1 fryer, steamer, and boiler now provides consumers the ability to fry, steam, and boil their favorite foods in a single product. |
| Check out our other products! | Simply plug the smoker in and it does the work. | Smoke your favorite foods at the touch of a button. | Taste of charcoal with the ease of an electric smoker. | Free the oven with innovation and safety. | Take it to the next level with Gravity Fed Charcoal Grilling.. | Protect your investment and make it last. |
|---|
product description
Color:Black
The Masterbuilt Smoker Leg Kit with Wheels gives mobility and increases the height for Masterbuilt digital electric smokers. The kit adds 10 extra inches of height to your smoker and the rear wheels make moving the smoker easy. Master it with Masterbuilt.
product details
important information
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
Questions about Masterbuilt MB20101114 Universal Leg Extension Kit, Black
Q:
Will this leg kit fit the Masterbuilt 40 inch digital smoker; the ad says it fits all Masterbuilt smokers but the dimensions don't match the 40" model
Answer:
Answer:
Answer: I have the 40" top-controller Masterbuilt model 20070311 and this leg kit fits it perfectly.
Answer: I have the smaller smoker but the kit comes with two different set of rails. The longer rails are for the 40" models. These are great legs.
Answer: Yes, the kit has different pieces depending on what size smoker you are installing it on. Note the plastic base pieces and original wheels need to be removed to mount the stand.
Q:
Will this fit the Masterbuilt 30 inch model 20079015?
Answer: Yes i think so. When I got my stand, I called/emailed MB, they answered question, fast. However, for 30", DO NOT FOLLOW INSTRUCTIONS FOR INSTALLATION! Put the 4 corners(legs) on first loose, the longest supports are not used and there are no doubles in those supports either. I called and got a tech to help...
Answer: yes it does
Q:
Does this fit bluetooth models
Answer: This will fit the Masterbuilt Bluetooth models, our Universal Leg Extension kit fits all Masterbuilt Digital Electric Smokers.
Answer: This stand is universal and fits all Masterbuilt smokers
Answer: Very confusing to assemble, instructions give do match model.
Q:
Do these legs replace the legs on my smoker from the factory or do they bolt-on to make it even taller?
Answer: This would replace the legs with current unit. They are universal so they fit 30 and 40 inch units.
Answer: Bolt on to make it taller.
Answer: Yes. They replace the smaller pegs from the factory.
Answer: No they didn't fit at all. We ended up having to cut and drill our own holes. Very disappointed in this product.
Answer: Yes
Q:
Does it fit 20075315
Answer: Fit my 20075315 perfectly!
Answer: If your 20075315 has the same footprint as 20071117 (my smoker) then yes. The legs provide a lot of wiggle room for different base sizes. Mine fit but it isn't like 'hand-in-glove' as some easy adjustments were necessary. So if your 20075315's footprint is different from my *0007 I'd say it will probably fit.
Answer: It says it’s fits all Masterbuilt
Q:
Does it fit the 25072215 models?
Answer: With the papers (instructions) they listed several models the this frame will fit. I am not certain of the model numbers.
Answer: When I bought mine it came with parts for the 30" as well as the 40". I think they are universal. But check first
Q:
Does this fit the 20074719 model?
Answer: I know that it fits several models. Comes with different sizes of cross members. But I no longer have the instructions to tell you what models it does fit. Sorry. I do know the instruction sheet is not the best in the world but you can figure it out on your own. Possibly you can find the sheet on line.
Answer: Yes, this leg kit will work for the model number provided.
Answer: This stand is called the "Universal" model due to it's wide selection of adjustments that allow it to fit a variety of smoker models. To really confirm the proper fit it would be best to call Masterbuilt "Customer Service" and get your answer direct from the source. I have the 40" and it fits my smoker perfectly.
Answer: Goggle it
Q:
does it fit MB20076718?
Answer: Yes, this Leg Kit will fit Masterbuilt Smoker model MB20076718. It is designed for 30 and 40" digital electric smokers.
Answer: I do not know because I have a 30 inch smoker.
Q:
Does this item fit a 40" Masterbuilt Electric Smoker
Q:
Was curious as to why amazon will not ship this item to california? tried several times with no luck. ended up ordering from newegg of all places.
Q:
Will this fit a mb20074719 mes140g?
Answer: The leg extension kit I purchased was for a 40" Masterbuilt model, and it fit well.
Answer: Yes, it should
Q:
Why won't this ship to California?
Q:
Does this fit 20071619?
Answer: This fits both 30 and 40 inch smokers.
Answer: Not a problem
Q:
Will this fit a masterbuikt 20070810
Answer: You would have to refer to the masterbuilt site to see.
Q:
Will this fit model 20071914?
Answer: Yes, this smoker leg kit will fit. For any additional questions you may have, please contact our Customer Support team at www.masterbuilt.com.
Answer: Supposedly it is for ALL electric smokers. I can't guarantee it, but it fit mine perfectly. Look on the description page, I think it states for all electric smokers. In the box I had parts for the 30" as well as the 40" smoker. Makes me think they are sort of a universal fit. Hope it helps
Q:
Will it work on model MES 130s
Answer: It should, yes.
Answer: You should contact Masterbuilt with this question.
Answer: Yes
Q:
Will this work with the Mb20070619?
Answer: Yes, this leg kit should fit this model.
Answer: I purchased my leg kit for a 40" Masterbuilt so if your model is the same size then it should fit.
Q:
Does this fit 21072719
Answer: You have to look at the description on the legs. It recommends it for certain models. I don't know off hand
Q:
does this stand come with casters?
Answer: yes two on the rear legs
Answer: Yes
Q:
Will this stand fit a 30 inch - model 20070910?
Q:
Will this fit model #20077515 with the smoker's wheels removed?
Answer: My smoker was the 40 inch with the rear wheels. You have to remove the wheels to use the legs.
Answer: Yes, it will fit.
Q:
Will this fit smoker model number 14202004?
Answer: My Masterbuilt Smoker is # MB20071117. Is your smoker a Masterbuilt? If so I would call Masterbuilt and ask them. If it is another company call them and ask. I really like the extension kit. It has two back wheels which is handy in moving it. You could even call Amazon customer service and see if you order it and it does not fit can you return it?
Answer: it will not work on it
Q:
Will this fit masterbuilt model 20077815?
Answer: I dont have
Answer: Yes
Q:
Will it fit 17202005
Answer: This is a universal leg kit designed to fit several Masterbuilt smokers, I don't know about your model but more than likely it would fit.
Answer: I don,t know if it will on a char-broil electric smoker. I have a MES 40" inch smoker. You might want to check with Masterbuilt to see if it will work on your model I am sorry I could not help you.
Q:
Does this stand kit fit model mb20072318?
Answer: Yes it fits my masterbuilt electric smoker's just Wright, and makes the smoker's stand taller no more bending over to cook.
Answer: Yes, this will work with the unit.
Q:
How to remove front legs on smoker?
Answer: The universal leg extension was provided. We are unable to provide information on the smoker without the model number.
Answer: When I purchased the new smoker I also purchased the extension legs to place the unit higher. We used a screw driver. Just tip the smoker on its side.
Answer: Its been a while since I removed the legs from the smoker but I believe I used a socket and a wrench. I hope that helps.
Q:
Will this fit a 30 in. Model # 20071218 ?
Answer: Thank you for your question, this will fit the model 20071218. The universal leg extension kit fits all Masterbuilt Electric Smokers except the MES 400 series.
Answer: Yes. This is the one I bought for mine.
Answer: Yes.
Q:
Does this fit the pitboss smoker
Answer: We are unable to advice what brands this accessory is compatible with. This Leg Kit is designed for Masterbuilt digital electric 30 and 40 inch smokers.
Q:
Does this fit 20070421?
Answer: Masterbuilt MB20071117 Digital Electric Smoker, 30 Is want I have
Answer: It doesn't fit so well, I am pretty mechanically inclined and it was a struggle.
Answer: Yes but when I first put it on I put it on backwards. Its a lot easier to move around with the wheels.
Answer: Yes it will work on any masterbuilt electric smoker's does that answer your question.
Q:
Will this stand fit mb21071216
Answer: It seems that some fit and some don’t. Probably depends on the mood of the guy in the assembly line. I’ve seen 2 that didn’t fit. I wouldn’t chance it if I were you.
Answer: great question, we had thoughts about whether or not it would fit ours. Different websites including MasterBuilt said different specs that it would fit. We did get it and installed it and it is great. We love the little lift so we don't have to lay on the ground to see the lower level of the box. Although I can't answer for your specific size I would recommend it. It fits ours which is the 30in model.
Answer: If you model is listed as fitting it should fit if not amazon is great for making returns because they know people make mistakes.
Q:
While checking out, I get an error that it can't ship to my location... in California. What's up?
Q:
Will this leg kit fit model mb20050614 44" gas smoker?
Answer: Check the specs.
Q:
I already have wheels with my 30" masterbuilt - does the 20101114 leg extension kit (which has no wheels) allow you to install your existing wheels?
Answer: The universal leg extension kit actually comes with wheels.
Answer: IT does not.
Q:
How much height is added when the wheels are installed, or are the wheels part of the 10" shown in measurements?
Answer: None the wheels set in and are only used when you pull so I guess your answer would be the ten inches is the measurement
Answer: No hight is add by installing the wheels. The wheels don't touch the ground unless you lean the smoker back.
Answer: The wheels do not add height, you tip it and roll on the rear pair.
Answer: I believe the wheels are included inside braces and work by tilting unit a bit and moving back or ahead...very nice improvement to a great smoker! Well done...
Answer: Thanks for the info and your help.
Q:
Does in come with wheels?? From Ceballa's & from Masterbuilt wheels are incuded.
Answer: There is a set of wheels that are located on the back legs of the stand. Makes it convenient to roll to n from locations..
Answer: Mine did. And despite the awkwardness of the installation, the wheels really do make it easier to get the smoker from point "A" to point "B".
Q:
Does this work for a mes 140s? I think it ends in 2618.
Answer: Don't think so
Answer: Can’t say but go to masterbuilt.com site will have your answer there that’s what I had to do and it’s worth the money for the stand
Q:
Does this stand fit smoker model number MB20074719
Answer: This universal leg kit fits most smokers with screw on feet.
Answer: is that model listed by masterbuilt to fit it would fit
Answer: Our smoker is a little different, but yes it fit ours great.
Q:
Does this work with 20070210 / mes 35b electric smoker?
Answer: Hi Ross, the Universal Leg Extension kit does not work with the model 20070210 as this unit already comes with legs.
Answer: It should. Ours is a different model, but with different sized bars for different models, it’s very adaptable. The installation instructions are not good - you have to figure out which parts go with your model. I thought the 20070210 came with legs.
Answer: Yes. It fits ALL Masterbuilt electric smokers.
Answer: The leg kit that I purchased was for a 40" Masterbuilt so if your model is a similar size then it should fit.
Q:
Where are the leg mease from the 21.6 22.6 ??
Answer: This is for both a 30" and 40" smoker, the width differs on the 30" = 22.5"w 40" = 27.5" and the legs themselves are approximately 6"
Q:
Will the extension 20071114 stand fit the smoker 20071117?
Answer: I have the smaller of the two electronic smokers. The stand comes with an extra set of side braces, which I guess will let it fit the larger smoker. All of my pieces fit nicely.
Q:
Will it fit 20073919?
Answer: Hi Patrick;
Answer: I'm not familiar with the particular Masterbuilt model but if it's a 40" model, the extension kit will fit.
Answer: It should, yes.
Q:
Will this stand raise a masterbuilt MB20077618 10 more inches higher than the legs already provided with this smoker or will the height be the same?
Answer: It will make it higher, but only 10" from the bottom of the smoker, not from the legs provided.
Answer: This will not work with the unit provided. The leg extension kit is for digital electric smokers only.
Answer: Yes the stand will raise the smoker's up you can stand up, and not been over when you smoke something. Very good product.
Answer: NO It is for smokers that don't come with the legs.
Answer: The same
Q:
My master built model number is esq30b2 will this fit?
Answer: We were not able to locate the model number provided. The universal kit will work for 30 and 40 inch Digital electric units.
Answer: I purchased my leg kit for a 40” Masterbuilt so if your model is the same size, the kit should fit.
Q:
Will this fit the MB20013020
Answer: No, this will fit digital electric units.
Q:
Will this fit model number 20072215
Answer: I have no idea .. it should say in the description
Q:
Will this stand fit model 20072115?
Answer: I don't know. I have model 20077915 and it fits perfectly.
Answer: I installed one on a 20076515 40" and it worked just fine. It should fit on all 30" and 40" electric smokers.
Answer: It should fit, but its hard to know for sure with so many models of smokers available.
Q:
Will they fit the weber ho anywhere tabletop bbq?
Answer: the stand did not fit properly for my smoker, even though it was supposed to be the one for it. I would not recommend it
Answer: We would not be able to provide compatibility for the units provided.
Q:
How easy is it to move the smoker from inside to outside with this on it as compared to before
Answer: I move my smoker inside and out with no problem at all.
Q:
Will it fit the model 20072115? I tried a different Masterbuilt stand which fit "most" smokers. Alas , not the model I have.
Answer: I bought the 40" smoker and the legs I bought at the same time fit. I don't know the model numbers. But the legs were advertised to fit the 40" model.
Q:
Why can't this be shipped to California?
Product reviews of Masterbuilt MB20101114 Universal Leg Extension Kit, Black
Dan : Not a universal fit as stated
The ad says universal fit, but the box clearly states that only some models can use the extension. It must be for a much larger unit that my 7 in one Air fryer/Smoker. I really wanted the extension, especially with the built in wheels. I hope the make one for the model I have as it is way too low. Great unit though!
Bob D. : Nice stand, no more getting down on knees to use smoker.
Quality stand. Installation on my smoker #20071317 took less than 30 minutes. Instructions could have been better, just illustrations.
Suggest you leave side screws hand tight and then tighten them down after you turn smoker right side up, this will help eliminate any wobble due to uneven ground.
Only thing better would have been to include a handle to help control smoker when moving it around on the rear wheels.
Suggest you leave side screws hand tight and then tighten them down after you turn smoker right side up, this will help eliminate any wobble due to uneven ground.
Only thing better would have been to include a handle to help control smoker when moving it around on the rear wheels.
M3 Pete : It DOES fit the 30 inch MB20071117 MES 130B - But you have to use the large bolt holes
This DOES fit the 30-inch MB20071117 MES 130B digital model, but the install is a little funky. On the front legs there are two elongated holes, these face each other and the elongations are parallel to the front of the smoker, see the photo of all four legs -- the smoker is lying on its back, so the door is at the top of the photo.
The obvious holes in the legs that fit the bolts are in the corners, but if you use them, then the front and rear bars won't line up. So you have to use the large holes next to the corner holes, towards the center of the smoker, as shown in the attached photos. These holes are way too big (you can still see part of the hole next to the washer in some of the photos), but using the big washers they will still work. Is this good engineering? No, but it does work. And everything else lines up just fine.
I suggest tightening the bolts, but leave all the screws just finger tight until you get it standing up on a level surface, jiggle the smoker to get it settled, then tighten all the screws. Since these legs do not have leveling screws, the only way to level the unit is to use shims (or whatever spacers you may have) under the legs to get it level.
And, like everyone says, the instructions are a joke. Drawings are too small, and you cannot see which holes are used for the bolts. For this model, you won't need the six smaller washers.
The obvious holes in the legs that fit the bolts are in the corners, but if you use them, then the front and rear bars won't line up. So you have to use the large holes next to the corner holes, towards the center of the smoker, as shown in the attached photos. These holes are way too big (you can still see part of the hole next to the washer in some of the photos), but using the big washers they will still work. Is this good engineering? No, but it does work. And everything else lines up just fine.
I suggest tightening the bolts, but leave all the screws just finger tight until you get it standing up on a level surface, jiggle the smoker to get it settled, then tighten all the screws. Since these legs do not have leveling screws, the only way to level the unit is to use shims (or whatever spacers you may have) under the legs to get it level.
And, like everyone says, the instructions are a joke. Drawings are too small, and you cannot see which holes are used for the bolts. For this model, you won't need the six smaller washers.
Amazon Customer : Heavy Duty Stand
Leg extension is heavy duty and well made. Installation went smoothly. That said, the tricky part was laying the smoker on it's side and raising it up a foot so the extension could be installed. Could not lay the smoker on it's top because of the electronics bubble.
Lonnie : This DOES fit the 30-inch MB20071117 MES 130B digital model
This DOES fit the 30-inch MB20071117 MES 130B digital model. Follow M3 Pete’s instructions in his review. The instructions that come with it are not very good. I just looked at M3 Pete’s pictures and figured it out. You will have two long pieces left over when you are done. Don’t forget the wheels in the box, as I almost did.
jwelch : Great smoker with a little bit of a grip. ????
Solid base for electric smoker but it would be nice if they offered one that didn’t have to replace same parts smoker comes with ( wheels and pins) or the 2 braces that fit a different size smoker again duplicate parts might save you $10 on price . Probably easier to make on kit universal but somebody’s paying for these xtra parts. By way made in Columbus Ga. aside from the picking great smoker super well made insulated well caution can cause over eating ????. lol
J. Clark : The instructions are useless, a better exploded diagram would have been useful
The instructions are useless, a better exploded diagram would have been useful. They make the stand to fit several models as a result there are like six holes in each leg with no instructions on which set fit which model.
Best process was to assemble the side supports and then with the smoker upside down on its top, line up which holes work best.
Once assembled, it does what it's intended, gives you a good working height. Frustrating assembly.
Best process was to assemble the side supports and then with the smoker upside down on its top, line up which holes work best.
Once assembled, it does what it's intended, gives you a good working height. Frustrating assembly.
Zach P. : Raised Smoker to nice height.
Installed this on my Masterbuilt smoker that didn't have any wheels or anything, it just had levelers under it. Installed without a problem and without any modifications. Only thing I wish this came with though was a handle modification to add a handle on the backside of smokers that didn't have wheels in the first place. It is very awkward trying to move the smoker now using the wheels because there is nothing to grab onto on the smoker. Other than that, it is really nice and placed the smoker higher in a more convenient location to access.
Andre D Watson : Masterbuilt Leg Extension
The extension fits well on my Masterbuilt smoker. The leg extension is sturdy and well built. Makes it easier to use and access the smoker. Money well spent for this purchase.
Pam : Not difficult
It's really not hard to put together. You won't need two pieces in the box, and the size you don't need depends on your smoker model. Don't tighten the nuts beyond hand tight until you've put the whole thing together. The wheels are nice.
Coolbob : The legs transform the smoker, providing a much more stable footprint and raising it up to a much better working height.
The instructions are minimal, consisting of three very small illustrations. I'm pretty good at putting things together, so it wasn't a problem for me, but I can see where they could be confusing for some folks. I think the same leg kit fits both the 30" and 40" smokers, so don't panic when you will have two metal braces left over. The legs transform the smoker, providing a much more stable footprint and raising it up to a much better working height.
Zach P. : Raised Smoker to nice height.
Installed this on my Masterbuilt smoker that didn't have any wheels or anything, it just had levelers under it. Installed without a problem and without any modifications. Only thing I wish this came with though was a handle modification to add a handle on the backside of smokers that didn't have wheels in the first place. It is very awkward trying to move the smoker now using the wheels because there is nothing to grab onto on the smoker. Other than that, it is really nice and placed the smoker higher in a more convenient location to access.
Simon : Does NOT fit the MB20071117 - not even close
I bought a new MB20071117 Digital Electric smoker and was shocked at how bad the instructions were. I have always had Bradley smokers and I suppose I thought that Masterbuilt would be of an equivalent standard. The smoker looked ridiculous on the ground and so I ordered this 'universal' leg kit. I defy ANYONE to make it fit the MB20071117. I spent two hours and had the front legs in every possible combination. Even with the back legs installed and a side bar in place, it was impossible to find any position where the holes in the front legs would line up in order to fix the side bar. I would consider myself very good at installing and assembling but this was impossible. The instructions are incredibly bad - actually even worse than the smoker. The whole thing is back in the box and going back to Amazon. I will just make my own base. There is NOWHERE you can go to check the compatibility of these legs with the smokers and judging by comments all over the place, I am not the first to find that it simply does not fit.
Coolbob : The legs transform the smoker, providing a much more stable footprint and raising it up to a much better working height.
The instructions are minimal, consisting of three very small illustrations. I'm pretty good at putting things together, so it wasn't a problem for me, but I can see where they could be confusing for some folks. I think the same leg kit fits both the 30" and 40" smokers, so don't panic when you will have two metal braces left over. The legs transform the smoker, providing a much more stable footprint and raising it up to a much better working height.
cesalio45g : Solid Materials - Easy Assembly
The box came in good condition from shipment.
Instructions are easy to read and all parts were included
The powder coated steal parts seem durable and hopefully will last in rainy weather
This legs definitely helped in raising the height of the smoker to a more acceptable reach.
Note:
You must remove off the existing screws from the bottom of your smoker and add the legs using the screws provided by this product. It will be easier on you, no need to use the existing screws that the smoker came with.
If you use your smoker frequently, this will make it easier for you to use.
Instructions are easy to read and all parts were included
The powder coated steal parts seem durable and hopefully will last in rainy weather
This legs definitely helped in raising the height of the smoker to a more acceptable reach.
Note:
You must remove off the existing screws from the bottom of your smoker and add the legs using the screws provided by this product. It will be easier on you, no need to use the existing screws that the smoker came with.
If you use your smoker frequently, this will make it easier for you to use.
Amazon Customer : We like the stand but difficult to install.
We like the stand after we got it installed, very difficult to install. The instructions are not much help. Here is a suggestion that made our installation go a lot easier. Before you try to install the legs to the smoker install the front, back, & side brackets to the legs, this way it helps to line up the legs when you install the legs to the smoker. I would have given 5 stars but for the installation.
RockDoc : Solid, sturdy, well made, good value
After reading other reviews talking about the terrible instructions, I was hesitant, but decided to try it anyway. OK, the directions could be better, but seriously, these legs fit ALL Masterbuilt electric smokers. IF they had detailed instructions for each, the manual would be a phone book. There are basically 10 pieces. 4 legs and 6 side supports. You only use 4 of the side supports (the longest ones for 40" and the medium-length ones for the 30". It doesn;t take a rocket scientist to figure out how to screw the legs and supports on. When done, it is SOLID. I was considering fabricating my own base, but it would have taken a lot more time, effort and $ than this base. Well worth the cost.
Scott Sears : Fit perfect on my 30” smoker
Perfect fit and easy to assemble. Raised it up just enough I don’t feel like I have to be on my hands and knees to get it and load or unload food!
Frank : Makes it easier to use the smoker
There seems to be a bit of confusion on assembly of this. The way i did it was i laid the smoker upside down. put on the 4 legs, making sure the legs with wheels are on the rear of the smoker. Tighten the bolts hand tight so the legs can still move a bit. There are 6 braces in the kit, pick the set of 4 that match the leg spacing. Tighten each leg hand tight. After all pieces are mounted tighten the legs, then tighten the braces (the braces are slotted holes and will take up any slop in the assembly). About the only thing i used the instructions for was to tell what fasteners to use. I like how the smoker is sup off the ground now and i dont have to bend all the way down. Was the stand really a necessity, no but it is a nice extra.
RP Warrior : Great Addition to the Masterbuilt Smoker
Installing the leg kit to my smoker went fairly smoothly except that I had to buy a few extra screws and nuts because my kit did not have enough. After installation, though, it elevates the smoker so that it makes the smoker more convenient to deal with and easier to clean underneath.
JRR : Great for the 30 inch Masterbuilt electric smoker
The stand raises the smoker up off the ground which makes it easier to use the bottom rack and easier to remove and clean the smoker. It also has wheels which makes it easier to move. Well worth the money.
CBH : Good once it’s finally assembled
After some struggles and some breathing exercises my husband was able to get it on his smoker. He likes the height on it and that’s what matters.
AT : Bad instructions
Instructions need to be more clear. Just showing a pic of what goes where when it's made for 2 different sizes does not help.
When I opened the box seen the parts no bags were labeled 1 2,3 nothing. Instructions dont even show measurements which could help when the kit is for a 30 and 40 inch. Thought masterbuilt would have better plans. Only reason I bought this was it had wheels. If there is a next time I will just pick the smoker up and move it.
When I opened the box seen the parts no bags were labeled 1 2,3 nothing. Instructions dont even show measurements which could help when the kit is for a 30 and 40 inch. Thought masterbuilt would have better plans. Only reason I bought this was it had wheels. If there is a next time I will just pick the smoker up and move it.
Amber : This product is janky as hell
The legs come with little to no instruction. We bought the 30 in Masterbuilt smoker and I bought these legs for the base.. the legs are wobbly and barely fit. They were all bent up when they arrived with no damage to the box ( so had to be factory) I think they may work better with a 40 in smoker. I am upset- it’s a complete rip-off! Do not buy these!! You will be disappointed
J. Covert : Buyer Beware!
Be very careful before ordering this product. The description indicated it would fit my smoker. When it arrived it was obvious that the parts had been repacked. All the parts were there so I tried to install it. NO GO! Either the included parts were incorrect or the description was inaccurate. Just got my return memo. The seller charged me ~$14 to return a product that was misrepresented. This is the first time I have gotten scammed on a product return through Amazon.
R. B. Nesin : A must have for anyone who owns a Masterbuilt Electric Smoker.
This stand is extra sturdy and super easy to assemble. It took about half an hour to assemble with only a screwdriver, a socket wrench and a regular wrench. I rolled my digital electric smoker around after and it moves easily. Fully assembled, the smoker sits level and there is no shaking or wobble when I open the door or slide the racks in or out. A must have for anyone who owns a Masterbuilt electric smoker.
Amazon Customer : 40 inch Masterbuilt smoker universal stand
The stand is a great stand. The instructions can be confusing. If your smoker is already assembled, you will need to remember the plastic on the front and sides of the smoker will need to be removed. If you haven't assembled the plastic parts yet , then get the hardware out that would be used. The hardware will be reused for the front legs. It's best to install everything somewhat loose when putting the legs on. It will make aligning the brackets easier If the holes in the bracket are not aligned properly it will not work even though it seems like they will lign up. So you may have to flip or rotate the brackets. That seems to be the biggest issue when putting it together. Also makes sure you are using the right brackets for your smoker. For instance, on the 40 inch smoker I used the shortest length brackets on the left and right side of the smoker and used the longest brakes on the front and back. The mid length brackets were not used. I am assuming these are for the 30 inch smoker.
J. Clark : The instructions are useless, a better exploded diagram would have been useful
The instructions are useless, a better exploded diagram would have been useful. They make the stand to fit several models as a result there are like six holes in each leg with no instructions on which set fit which model.
Best process was to assemble the side supports and then with the smoker upside down on its top, line up which holes work best.
Once assembled, it does what it's intended, gives you a good working height. Frustrating assembly.
Best process was to assemble the side supports and then with the smoker upside down on its top, line up which holes work best.
Once assembled, it does what it's intended, gives you a good working height. Frustrating assembly.
Juanita Floyd : No Star Rating
Where to begin. First off it took almost 2 months to get this after I ordered my smoker. Didn't think it would matter, but it does because you have to stand your smoker upside down to install the legs. Not really possible in some models with a top display that isn't flush with the top of the smoker. Finally got it rested on a pillow to protect the display.
Then there are the directions. A term I use very loosely in this case. There are 3 diagrams so small you need a magnifying glass to see them. No real guidance on what holes to use, what hardware to use. The legs connect to the body of the smoker with only one point of contact which makes it very difficult to get them to stay put while you do the braces.
Then there are the braces. 2 hours into it I finally got the braces to kind of line up. I was 5 minutes away from putting this back in the box and returning it. Nothing is worth that kind of effort unless you get it free.
The wheels on this are about as useless as tits on a boar too.
Then there are the directions. A term I use very loosely in this case. There are 3 diagrams so small you need a magnifying glass to see them. No real guidance on what holes to use, what hardware to use. The legs connect to the body of the smoker with only one point of contact which makes it very difficult to get them to stay put while you do the braces.
Then there are the braces. 2 hours into it I finally got the braces to kind of line up. I was 5 minutes away from putting this back in the box and returning it. Nothing is worth that kind of effort unless you get it free.
The wheels on this are about as useless as tits on a boar too.
M3 Pete : It DOES fit the 30 inch MB20071117 MES 130B - But you have to use the large bolt holes
This DOES fit the 30-inch MB20071117 MES 130B digital model, but the install is a little funky. On the front legs there are two elongated holes, these face each other and the elongations are parallel to the front of the smoker, see the photo of all four legs -- the smoker is lying on its back, so the door is at the top of the photo.
The obvious holes in the legs that fit the bolts are in the corners, but if you use them, then the front and rear bars won't line up. So you have to use the large holes next to the corner holes, towards the center of the smoker, as shown in the attached photos. These holes are way too big (you can still see part of the hole next to the washer in some of the photos), but using the big washers they will still work. Is this good engineering? No, but it does work. And everything else lines up just fine.
I suggest tightening the bolts, but leave all the screws just finger tight until you get it standing up on a level surface, jiggle the smoker to get it settled, then tighten all the screws. Since these legs do not have leveling screws, the only way to level the unit is to use shims (or whatever spacers you may have) under the legs to get it level.
And, like everyone says, the instructions are a joke. Drawings are too small, and you cannot see which holes are used for the bolts. For this model, you won't need the six smaller washers.
The obvious holes in the legs that fit the bolts are in the corners, but if you use them, then the front and rear bars won't line up. So you have to use the large holes next to the corner holes, towards the center of the smoker, as shown in the attached photos. These holes are way too big (you can still see part of the hole next to the washer in some of the photos), but using the big washers they will still work. Is this good engineering? No, but it does work. And everything else lines up just fine.
I suggest tightening the bolts, but leave all the screws just finger tight until you get it standing up on a level surface, jiggle the smoker to get it settled, then tighten all the screws. Since these legs do not have leveling screws, the only way to level the unit is to use shims (or whatever spacers you may have) under the legs to get it level.
And, like everyone says, the instructions are a joke. Drawings are too small, and you cannot see which holes are used for the bolts. For this model, you won't need the six smaller washers.
Tripp : Very sturdy but vague instructions
The instructions for this leg extension kit is basically useless. The print is very small, it doesn't show detail, and it doesn't even call out where pieces go. The leg extension kit itself is very strong and made from durable materials. It puts my 30" MES at the perfect height and I no longer have to pick it up and move it when I want to use it or when I put it up now that I can wheel it around. If the instructions were more clear or actually showed what holes to put the bolts in (there are several potential threaded holes on the bottom of my smoker so I had to do it by trial and error) then I would have given 5 stars.
Juanita Floyd : No Star Rating
Where to begin. First off it took almost 2 months to get this after I ordered my smoker. Didn't think it would matter, but it does because you have to stand your smoker upside down to install the legs. Not really possible in some models with a top display that isn't flush with the top of the smoker. Finally got it rested on a pillow to protect the display.
Then there are the directions. A term I use very loosely in this case. There are 3 diagrams so small you need a magnifying glass to see them. No real guidance on what holes to use, what hardware to use. The legs connect to the body of the smoker with only one point of contact which makes it very difficult to get them to stay put while you do the braces.
Then there are the braces. 2 hours into it I finally got the braces to kind of line up. I was 5 minutes away from putting this back in the box and returning it. Nothing is worth that kind of effort unless you get it free.
The wheels on this are about as useless as tits on a boar too.
Then there are the directions. A term I use very loosely in this case. There are 3 diagrams so small you need a magnifying glass to see them. No real guidance on what holes to use, what hardware to use. The legs connect to the body of the smoker with only one point of contact which makes it very difficult to get them to stay put while you do the braces.
Then there are the braces. 2 hours into it I finally got the braces to kind of line up. I was 5 minutes away from putting this back in the box and returning it. Nothing is worth that kind of effort unless you get it free.
The wheels on this are about as useless as tits on a boar too.
Steve : ... Signature Series 40 inch smoker and the kit fit great. I did have one problem with a cross ...
I have the Masterbuilt Signature Series 40 inch smoker Model # 20076515 and the kit fit great. I did have one problem with a cross brace that had an interference condition on the back leg. So I had to modify the brace slightly by removing some metal from the edge of the part. This required a hack saw and a machinists vice on my workbench. This was no problem for me but might be for someone else. That's the only reason it didn't get five stars. The kit itself was well packed and organized. The parts are well made, sturdy enough for the task and nice fit and finish. The instructions are really inadequate if someone is looking for a lot of detailed instruction. These instructions are basically pictures and you have to figure out how to make it look like the picture. Again, for me it wasn't a problem because I have a lot of experience with parts, manufacturing, assembly, etc. But I can see why some of the comments expressed frustration.
CatDaddy & Biatch : Fits 20078715 Masterbuilt but......
Very bad instructions so you are on your own to figure it out. The misc washers BTW are to use when installing on the smoker as the holes on this stand are way too large for the bolts that come with the smoker when utilizing their plastic front legs. You don't use the plastic front legs on the smoker with this stand. It is very well made with all aluminum and the rear wheels make it easy to move around on your patio.
The Librarian : Not Entirely Universal
Not entirely universal. It didn't completely fit my 30" Masterbuilt electric smoker, but I could make it work with a little customization, leaving a piece off, having the company send me an extra piece, and a little extra persuasion. It is great not having to lean over to the ground to use the smoker and being able to roll it around, but it took a while to get it installed, and it still is not to factory specs, because it just didn't fit my smoker, even though it says universal.
Reed : Excellent stand
Stand is well made and durable. It fit my Masterbuilt 130|B electric smoker just fine. My only issue is the instructions. They are not very clear. No instructions, just pictures that are printed so small, you about need a magnifying glass
Bob : It Is What It Is
Its good but, there are some issues. I bought a "used" one for my Masterbuilt electric 20070411 30" and think I still paid too much for it. It was all in tact and pretty sure it had never been opened. Metal pieces all straight and no scratches. If you have a 40" there are two pieces in the box specifically for yours. It comes with wheels. Its easy enough to install (took about 20 min to unpack and install) but because the legs are slanted, the cross-members have two slanted holes at each end that have to match to the holes on the legs so you are having to flip the pieces around to make them match up. You are to use the preexisting bolts to hold in the front legs to the smoker. If your electronic control panel is on top back (like mine) then you can't turn the smoker upside down to work on it, you have to work on its side. However, I would recommend you do not tighten any bolts until you turn it right side up. That way the weight of the smoker will make sure all four legs are touching ground at the same time and THEN tighten them all so the smoker does not have an irritating rocking motion from leg to leg. There are no levelers to correct this issue and if your smoker leans forward (because all concrete is poured on a slope) your excessive grease will not flow to the trap (if its in the back like mine). If your grease trap is in the front then that's a good thing unless its also flowing out your front door...
Pros: Raises your smoker 10" off the ground so you can work easier inside and out.
Sturdy enough for the job.
Wheels
Cons: No leveling options except to stick a board under the legs.
Expensive - I could have built one out of boards or used cinder blocks.
Doesn't tell you what tools you will need (size of bolts). Its metric so I used a small crescent and a regular phillips
Pros: Raises your smoker 10" off the ground so you can work easier inside and out.
Sturdy enough for the job.
Wheels
Cons: No leveling options except to stick a board under the legs.
Expensive - I could have built one out of boards or used cinder blocks.
Doesn't tell you what tools you will need (size of bolts). Its metric so I used a small crescent and a regular phillips
dieselpower70 : Nice. Makes in more convenient.
Nice product. Widens the footprint a little and the instructions are not terribly clear, considering it works for both the 30" and the 40" model. Some pieces are used and others are not as well as variations on the holes used to bolt it together, depending on the smoker you are installing it on. Allows you to move it with the drip pan still on and raises it enough to be a little more comfortable putting items in and out.
Alexander Haynes : Nice stand, minor flaw
This stand was great for raising my MB electric smoker off the ground. The materials are good and sturdy. However the two wheels weren't properly drilled in the center, so after mounting them, one wheel rolls perfectly while the other rubs on the stand. I will have to modify the wheel or the stand leg to make it work as it should.
Thommy550 : Used on MES130B Masterbuilt Smoker.
I used the stand on my MES130B smoker. Once the product was finish it helps then standard smoker stand at a usable height with great accessibility for somebody who’s taller such as myself. I took one star off because the instructions for assembly are worthless. If you have any common sense on building things you can get it together yourself but if in anyway you’re challenged at this I recommend getting somebody to put a get together for you. The instructions are four pictures saying these parts go here and that’s about all. It took me about two hours to assemble this by myself. Based on the suggestion of another reviewer I placed a blanket down on the ground and turn the smoker on inside to get it assembled. It appears to be sturdy and should last but only time will tell .
John Thorn : Worker perfectly, despite terrible assembly instructions.
This worked perfectly for my older 30 inch (20070910). Instructions left a LOT to be desired but through trial and error, I figured it out and it went together nicely. So glad that it sits taller now, making it a lot easier to use the smoker. If you have one of the Masterbuilt cabinet style smokers, get a stand! You won’t regret it.
mb : Fits perfectly
I have the 30” smoker with digital unit on top (no window on door) and this was cake to install. I was a little worried when reading some of these reviews saying it wouldn’t work, but it’s all bogus. My 6 year old could do this with one arm behind his back.
Ignore the long pieces, use the right holes (large holes for front legs, elongated slots for rear legs), leave all just finger tight until everything is together, then tighten when done. Easy.
Ignore the long pieces, use the right holes (large holes for front legs, elongated slots for rear legs), leave all just finger tight until everything is together, then tighten when done. Easy.
Leena Patel : Wanted to love this but couldn't
I bought this as a Christmas gift for my husband. It had awful directions and didn't fit properly. I chose to return it but would have to pay for shipping and 20% restocking fee which isn't worth returning it.
Hoss Walters : Definitely works with MB20071117
I put this on my MB20071117...it looks great and works great. That being said, it wasn't the easiest job to get it on there. Read the review from M3 Pete titled 'It DOES fit the 30 inch MB20071117 MES 130B - But you have to use the large bolt holes' and look at the pictures. I did exactly what it shows and it worked perfectly.
The instruction manual might as well have been in a foreign language because it was so small, you couldn't read it!
Pros: Looks great, works great and is very sturdy.
Cons: Instruction manual sucks and is useless for the MB20071117 MES 130B.
Would like: Some sort of handle to mount on the back of the smoker. When the leg kit is installed, it has wheels to help move it around...but it's difficult because there is no handle to hold on to.
The instruction manual might as well have been in a foreign language because it was so small, you couldn't read it!
Pros: Looks great, works great and is very sturdy.
Cons: Instruction manual sucks and is useless for the MB20071117 MES 130B.
Would like: Some sort of handle to mount on the back of the smoker. When the leg kit is installed, it has wheels to help move it around...but it's difficult because there is no handle to hold on to.
Thommy550 : Used on MES130B Masterbuilt Smoker.
I used the stand on my MES130B smoker. Once the product was finish it helps then standard smoker stand at a usable height with great accessibility for somebody who’s taller such as myself. I took one star off because the instructions for assembly are worthless. If you have any common sense on building things you can get it together yourself but if in anyway you’re challenged at this I recommend getting somebody to put a get together for you. The instructions are four pictures saying these parts go here and that’s about all. It took me about two hours to assemble this by myself. Based on the suggestion of another reviewer I placed a blanket down on the ground and turn the smoker on inside to get it assembled. It appears to be sturdy and should last but only time will tell .
Amber : This product is janky as hell
The legs come with little to no instruction. We bought the 30 in Masterbuilt smoker and I bought these legs for the base.. the legs are wobbly and barely fit. They were all bent up when they arrived with no damage to the box ( so had to be factory) I think they may work better with a 40 in smoker. I am upset- it’s a complete rip-off! Do not buy these!! You will be disappointed
Bill : Sturdy and raised the smoker to a much more comfortable and usable level. A must have for your smoker. Fits MES 230G well.
Great price vs. MSRP. Sturdy and raised the smoker to a more comfortable and usable level. A must have for your smoker!! Assembly is easy BUT beware that you will need to re-use some screws from the standard feet of the smoker. They include crossbars for both the 30" and 40" smokers. You will need a magnifying glass to read the small print and illustrations of the skimpy instructions. The stand did fit my MES 230G smoker well and raised it up enough so I don't have to get on a knee to use it. My assembly advice: lay the smoker on its left or right side elevated (I used a garbage can). Also leave all screws loose until the entire stand is assembled then you can tighten them as you align the stand with the bottom of the smoker.
Donna Minshew : Worked greater for my 30" Masterbuilt electric smoker.
I bought this to raise my smoker off the ground. I was surprised how much difference the small height change made to usability. I also found the small wheels built into the back legs very useful for quickly moving the smoker around. The only drawback I see now is missing a handle when moving the smoker with the wheels. But the stand itself is definitely worth the price.
Ben : Great stand!
Fits Cabela’s Masterbuilt MES 140S. Great quality metal stand and plastic wheels. The steel nuts/bolts are porcelain coated to prevent rust. You will need some of the hardware from the original front feet of the smoker, as indicated in the directions that come with this stand. The stand is universal for all Masterbuilt digital electric smokers except MES400 series and above, as stated on the box for this stand. Overall very nice and worth the money.
jwelch : Great smoker with a little bit of a grip. ????
Solid base for electric smoker but it would be nice if they offered one that didn’t have to replace same parts smoker comes with ( wheels and pins) or the 2 braces that fit a different size smoker again duplicate parts might save you $10 on price . Probably easier to make on kit universal but somebody’s paying for these xtra parts. By way made in Columbus Ga. aside from the picking great smoker super well made insulated well caution can cause over eating ????. lol
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
-
EGO Student Nets, Bug, Butterfly & Aquatic Netting, Wooden Easy & Safe for Kids, Get Kids Outdoors Again, Science NetsAvailable in 3 Types review and price compare -
Outdoor Edge ReelFlex-Pak, 5-Piece Professional Grade Fishing Fillet Knife Combo Set with Three Knives, Sharpener and a Hard Side Carry Case review and price compare
-
Cup Sealer Film 3275 PCS - Bubble Tea Cup Sealing Film 95 mm (3.74'') for PP Plastic Cups/Paper Cups… (SMILE) review and price compare
-
QDH Vacuum Sealer Machine With Built-in Cutter, 95kPa Pro Vacuum Food Sealer, Automatic 5-in-1 Food Sealer Led Indicator Lights,Easy to Clean,Dry & Moist Food Modes,Compact Design review and price compare
-
Topographical Fishing Map of Toledo Bend Reservior - with GPS Hotspots review and price compare
-
Nesco Foodscreen Dehydrator Accessory 2/Set review and price compare
-
HeavenBird Fishing Cast Net with Fishing Bag, Use for Bait Fish, Radius 4/5/6/7 ft Mesh 5/8 in, Come with Orange Fish Bag review and price compare
-
SOONHUA Portable Foldable 6/12 Holes Automatic Fishing Net Landing Trap Cast Dip Cage Fish Shrimp Minnow Crayfish Crab Baits Mesh Trap review and price compare
-
Lee Fisher Sports Mako Cast Net 6 Ft (3/8" SQ Mesh) review and price compare
-
BUBBA 7" Tapered Flex Folding Knife with Non-Slip Grip Handle, Offset Full Tang Stainless Steel Blade, Lanyard Hole and Synthetic Sheath for Fishing review and price compare
-
ZRM&E Adjustable Fishing Wader Belt Wading Belts Fighting Belt Wader Straps D ring and Hook Fits Waist Belts Fishing Equipment review and price compare
-
ZQDMBH Fishing Cast Net 12FT/3.6m Hand Throw Fishing Cast Net Spin Bait Sinker Mesh Equipment Nylon Monofilament Fishing Network Outdoor Accessories review and price compare
-
Houston Fishing Map, Lake review and price compare
-
PIT BOSS 77220 2.2 Analog Smoker review and price compare
-
Patoka Lake Fishing Map review and price compare
-
FishingTAG [ Fish Measure, Ruler for Fishing Tournament, Fishing Competition app Smart Measure Keyring- Fish Measure, Ruler, Fishingm, Premium, Measure Tape, App review and price compare
-
Masterbuilt MB20101114 Universal Leg Extension Kit, Black review and price compare
-
Folded Portable Shrimp Trap Lobster cage Automatic Fishing Net Minnow Crayfish Crab Baits Cast Mesh Trap review and price compare
-
ZALING Spiral Fishing Swivel Safety Fast Snap Solid Rings Ball Rolling Fishing Accessory #2 review and price compare
-
Mini Bag Sealer, Portable Sealer, Heat Sealer for Vacuum Sealer Bags, Handheld Bag Heat Resealer Machine for Chip Bags, Plastic Food Bags, Snack & Cereal Bags (Pink) review and price compare
© 2025 fishing.qciss.net All Rights Reserved. fishinghub copyrights