Cajun Bowfishing Spinning Reel Mount, Silver, One Size review and price compare 2025

you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you

Product overview

Brand	Cajun Bowfishing
Material	Aluminum
Hand Orientation	Right Hand
Color	Silver
Item Weight	0.3 Pounds

product features

This fits your .

by entering your model number.
For mounting a spin-casting reel to the bow stabilizer bushing
Threaded end provides for a fishing rod attachment

product description

Product Description

Fishing reel mount : Everything we make is built to make the most of it. When you're out, deep into what's right and natural, we're right there with you. Pick up your Cajun products, head for the water, and know you're about to have the best, most satisfying fun time time of your life.

From the Manufacturer

For mounting a spin-casting reel to the bow stabilizer bushing; Threaded end provides for a fishing rod attachment. Model: ABF4025.

product details

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 10 x 2 x 4 inches; 4.8 Ounces
Item model number ‏ : ‎ ABF4025
Department ‏ : ‎ Unisex-adult
Date First Available ‏ : ‎ October 11, 2009
Manufacturer ‏ : ‎ Sportsman Supply Inc.
ASIN ‏ : ‎ B00BQ7ZOQG
Country of Origin ‏ : ‎ China
Domestic Shipping: Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
International Shipping: This item can be shipped to select countries outside of the U.S.

important information

Important information

Legal Disclaimer

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you

Questions about Cajun Bowfishing Spinning Reel Mount, Silver, One Size

Does the seat work for all reels or does it need a specific bow fishing reel?

Answer: I've used it on the Zebco. As far as I can tell there is no difference in the muzzy or zebco reel seat mounts.

What type of thread are those female threads on the bottom end?

Answer: standard, you can but the rod add on that goes to it for 10$

Does it work with the https://www.amazon.com/cajun-archery-bowfishing-fiberglass-attachment/dp/b00bq7znps/ref=pd_bxgy_200_2?_encoding=utf8&pd_rd_i=b00

Answer: Yes. The rod helps control the string.

Answer: i don't have the rod tip but my guess would be yes.

Answer: Yes, these two pieces will connect together.

Answer: Yes it does.

Answer: yes

Does this fit a fly reel?

Answer: I don't see why it wouldn't

can it fit darton 40b

Will this fit an bow?

Answer: yes that's what it's meant for

Will this attach to a pistol crossbow?

Answer: yes but most crossbows have the bar that you put your foot in to cock it in that spot you may be able to use that to keep it in place also

Product reviews of Cajun Bowfishing Spinning Reel Mount, Silver, One Size

Mitchell Osborn : Four Stars

Works fine.

neil howes : Five Stars

great

burleson86 : Two Stars

is what it is a cheap seat. if you want it to stay put plan on welding it

Amazon Customer : works great

using it for carp

Stephen Bean, : Don't Waste Your Money

Bought 2 of these to mount Zebco 808s on my bow and my son's. Although the one I mounted on my PSE works, sort of, it is nearly impossible to get both the reel tight and aligned, and get it tight enough in the stabilizer mount to not turn. The other one arrived missing a nut....OK, no big deal we figured, we'd get one at the local hardware store or specialized bolt and screw company. Guess what? Neither place had a matching nut, it is a very uncommon threading. So, after wasting our time on this, I figure that we'll just return it...nope, time expired. Going to order a couple of good quality ones from backwateroutdoors.com this week.

Brian B. : Doesn't snug up good on the reel

Doesn't snug up good on the reel. The sliding part broke on first use. There are better options for the money.

FISHBGY : Five Stars

A +++

RAM : 5 stars... If it had directions!

This reel seat definitely does the job. Although it was a bit of a pain to get the reel perfectly straight. It would've been less confusing if it would have came with some directions. I wasn't able to get the reel to sit straight while also tight in the stabilizer threads. I spent about an hour figuring it out. So here, I'll post some directions.

1. Thread the mount about halfway into your stabilizer threads until you have the inserts for your reel at the top aligned. You only want it halfway so your reel button doesn't touch your fingers while holding your bow.

2. There should be two nuts on the thread. Separate them and loosely tighten one towards the reel. Once again, loosely tighten the second one towards the bow. There should be about a cm gap between the two nuts.

3. Take two wrenches or vice grips or one of each, whatever works. And tighten the nuts, in opposite directions, at the same time while keeping your reel mount straight. This will allow you to get a really snug fit.

4. Place your reel into the mount. Hand tighten the two threaded rings up to the insert. Make sure your reel is nice and snug. Grab your vice grip and crank the rings in as far as they will go.

5. For extra sturdiness I then took my vice grip and bent the front reel insert snug around the reel. The reel still slides out fine with a small amount of force... Much better than having a loose reel moving around.

All in all, this is a great low price reel mount. Just make sure you buy a bowfishing pole tip to insert into the front of the mount and you'll be set! Looks absolutely fabulous on my Cajun Sucker Punch. I highly recommend this setup over the AMS Retriever if you're an experienced bowfisher. Its reeling is just much, much faster... And cheaper, can't beat that!

Good luck and shoot straight!

Dingo : Nicely made, great price

I bought this reel seat for a purpose other than fishing, but I still need it to hold a Penn 320GT2 LC reel. If you are mounting a reel larger than this one, you might not get the mounting ears on the reel to fit, but it managed to accommodate the Penn. The machine work and finish are fantastic on this reel seat, and I think it will provide years of service. Oh, for the curious out there: I am using the reel seat and reel to lower and raise a pressure recording device into and out of drill rods to check water levels on relatively deep (>1,000') water exploration drill holes!

shane sterling : Five Stars

definitely the one out there

Dan L. : As expected

I dont bowfish. Got this to mount to recurve for setting tree lines. Performs as expected.

Ames : Great little tool!

It is a neat little attachment that can save $100s. Insted of buying the whole kit. you just attach this the you can put any reel on.

Dan L. : As expected

I dont bowfish. Got this to mount to recurve for setting tree lines. Performs as expected.

A Widow's Son : Good idea bad quality

Cheap and will not hold up to the demands of Bow Fishing. Porely fitted and machined.

Tony Valiant : wasn't strong enough to hold my reel. I had ...

wasn't strong enough to hold my reel. I had to bend the metal just to get it so the reel would even fit in the seat.

Brian B. : Doesn't snug up good on the reel

Doesn't snug up good on the reel. The sliding part broke on first use. There are better options for the money.

MRCHIRO : This reel holder is strong and made well - just poor design in my book b/c there is no way ...

I would improve on this design so that the base will not twist and slide. As of right now, I have the installed and let me tell you - it's one heavy beast! It wants to spin and drop facing down. This reel holder is strong and made well - just poor design in my book b/c there is no way of making it stay put. What they should have done is have the whole center piece as one "solid" piece - then use grade 8 bolt so that I can torque the heck out of it without ruining the bolt. I've worked with these bolts before - they are easily over torqued then snap off! Here is a photo of my setup (i'll probably shoot just regular arrows out of it) then make another one for my fishing bow. Cheers!

tim thomspon : Four Stars

Works, although it always requires adjustment.

justin nye : Needs to be built better

Metal is really thin. Breaks easily

you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you