River Country Universal Replacement Electric Smoker and Grill Heating Element with Adjustable Thermostat ControllerNEW 1500 Watts Higher Heat review and price compare 2025

you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you

Product overview

Brand	River Country
Power Source	Corded Electric
Color	Black
Item Dimensions LxWxH	16 x 11 x 3 inches
Fuel Type	Electric

product features

This fits your .

by entering your model number.
1500 watt, 110 US volt Heating Element with adjustable mounting bracket and element support feet
Fully Adjustable and Detachable UL Listed 110 volt thermostat Controller
Built in Controller Heating On indicator light
52" heavy duty flexible controller power cord
Easy Mounting with complete instructions included

product description

River Country, one of your most respected manufacturers of Grill and Smoker Thermometers is proud to introduce the River Country Universal Electric Smoker / Grill Adjustable Heating Controller and Element. The matching heating controller and element are designed for the Barbecue Enthusiast who is designing and building their own electric smoker or grill and looking for an easy to use and install electric heating system. The controller and element can be added to many existing large smokers and grills if you're to incorporate in a separate food warmer area. The heating element and matching adjustable controller allows you to adjust the temperature from approximately 50 F up to 450 F, depending on size, construction and materials used in the smoker or grill. The heating element features an easy mount flange which requires a rectangular opening in the side of your grill or smoker of 2 5/8" by 1" for the removable controller attachment flange. The element mounting bracket allows for adjustable bolt mounting from 2 ¾" to 3 ½" on center and can be attached with user supplied bolts and nuts. The heavy duty 1500 watt element uses standard US 110 volts and come with 2" tall stabilizing supports for the ends of the element. The controller easily can be unplugged from the heating element for cleaning and storage and features an easy to adjust dial thermostat with a heating on indicator light. The controller is UL listed and has a heavy duty yet flexible 52" power cord for safe use of your grill or smoker year round. The River Country element and controller may be used as a general replacement for other brands of electric smokers and grills, however, please be sure to check your manufacturer's warranty and mounting requirements and sizing specifications as shown in the secondary product pictures.

product details

important information

Important information

Legal Disclaimer

Universal: Can be used in many different applications, please check the detailed measurements in the pictures and listing to ensure this unit will work for your needs.

you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you

Questions about River Country Universal Replacement Electric Smoker and Grill Heating Element with Adjustable Thermostat ControllerNEW 1500 Watts Higher Heat

Does this fit brinkman electric smoker?

Answer: I was able to fit it in my Brinkman smoker. It took a bit more work than I had expected. I used a dremel with a small cutoff wheel. There are two holes that needed to be enlarged, the inside and outside trays. After about an hour and half a dozen wheels, the job was done. Now you have to bend the element a bit so it fits and doesn’t touch the metal tray. Haven’t tried it yet but hopefully it will work.

Answer: I used a dremel with a metal blade. Fits perfectly.

Answer: I made it fit in mine. Just cut the original hole bigger with a torch.

Answer: No, and it cost me almost $20 to find out ( return shipping cost and restocking fee!). Amazon should not allow this to be listed as a "universal" replacement part

Will it work on a Masterbuilt 20070409?

Answer: The heating element is easy to shape iif needed to fit in bottom of smoker. If the holes don't fit in the side. You can easily bore another one

Answer: I don't know, I used it on a Char-broil it didn't get the temp above 100

Answer: It's easy to adjust, may have to make a change for plug install

is the 16" length from end of element to end of handle

Answer: Hello! The element is 14 1/4" from the top of the element to the mounting bracket. Thank you!

Answer: I'm not sure. Many purchasers have to carefully bend the element to fit. I bent mine to fit in the bottom of my Brinkmann electric smoker. Have you tried contacting the seller/Mfg? Sorry I couldn't be more help. Scott

What are the Length X Width dimensions of the element?

Answer: Hello! The element is 14 1/4" long x 11 1/2" wide. Thank you!

Answer: 16 x 11

Any reason why this wouldn't work for a propane to electric conversion in a smoker?

Answer: I used 2 units to convert my masterbuilt xl smoker. You'll need insulation of some sort, I have an old blanket I wrap mine in and cut a hole in it near the exhaust. With the blanket I can easily maintain 275 with elements on low. Propane is still usable on mine as well

Answer: it would work great. I put it in a charcoal smoker works great

Answer: I think it would work it gets 450 degrees.

Answer: No reason at all. This wont be nearly as hot as propane would be though. I had to cut down the soak time for my chips cuz it wouldnt burn them.

Answer: Yes, it works well. It produces enough heat to smoke well in a converted upright freezer.

Answer: I tried the same application. It did not get hot enough to cure meat

Answer: It isn't the greatest.

Answer: It is not the greatest.

Answer: Thats what i did but it didn't get hot enough.

will this element work in masterbuilt smoker model 20071514

Answer: Worked fine. I did have to drill a new hole on one side as the mounting holes for the element don't match.

Answer: Not sure what model that is but should work. I have a propane model and had trouble get the temp low enough. It could require a piece of sheet metal for the bottom to reduce air drafts. Hope this helps!

We have a croydon pizza oven .both heaterelements are gone.It uses 3000 watt,110volt ,60hertz.can your elements work for our oven?It is used every day

how long could this be left running continuously?

Answer: It turns itself on and off according to the setting, I've left mine on for more than 12 hours while smoking brisket.

Will the heating element work on a master built 70070106

Answer: If your box is larger than or equal to 14 1/4 long and 11 1/2 wide it will work , excellent element holds temperature very well and steady.

Answer: Sorry, I can't help much. Look at the dimensions of both and see. Mainly, look at the part that goes the opening on the body of the smoker; I had to make some modifications as each smoker's element attaches differently (some holes are round, some rectangle but they can fit).

Will this fit a Charbroil H2O smoker part # 4754512

Answer: Not sure. It was a little to big for my Masterbuilt so I had to bend in the sides a little. Now it fits perfectly and works better than the original.

Aloha, i moved into a condo and can't use a flamed grill on the deck, electric is ok. has anyone converted a pk grill to electric?

Answer: no

How long does it take to heat up a 20”x20”x3’ smoker to 250 degree?

Answer: reaching 250 will take in my smoker about 10mins. It takes about 20-30 to reach 400+ degrees.

Does this element fit a smoke hollow smoker?

Answer: I had to ream out the opening on my bullet smoker to make it fit. It works great.

Answer: This is definitely not “universal”. Check the dimensions carefully....I had to pay restocking fee when I sent mine back.

Answer: It works real well. I am pleased

approximately how big of an area wil this heat to 250 if its around 70 outside

Answer: 16 cubic feet, it works great on my 2x2x4 tall homemade smoker

I'm thinking about adding this to my smoker so I could char/seer a steak. Ifvthe coil is close enough to the cooking surface would it get hot enough?

Answer: Maximum temperature for my smoker is about 325 degrees. Thermometer probe is about 12 inches above the element.

Answer: I would think so the control goes over 300 degrees

Answer: Yes. My old smoker stated you could remove all but the base and grill with it.

Answer: Oh yeah. Gets plenty hot. Should be ok.

Answer: That would probably work, it will maintain 400 deg.

Answer: Yes it will.

How easy is it to bend the coil? Our electric coil currently measure about 11 x 8; this one looks to be about 11 x 14. Thanks

Answer: These coils can be bent, just remember the configuration of how they are constructed, prior to purchasing I would purchase the configuration that is needed. They have provide several different configurations of heaters for the same money and if not give them a call, they are very easy to work with. Hope this helps.

The listing has the dimensions at 16 x 11; however, you have several answers yourself that put it at 14 1/4 x 11 1/2. Which one is correct?

Answer: Hello! The element is 14 1/4" long x 11 1/2" wide. Thank you!

Answer: it is 14 1/4 x 11 1/2

Does anyone know if this will fit a masterbuilt 30" smoker?

Answer: With lots of modifications Plug original element hole. Cut new hole for new element. Squeeze element. Caulk around new stuff. Added 12g copper wires x 3 or 4 tracing from one leg of element to other to create more geared contact with the smoke box.

Will this work on a smoke hollow 26142e?

Answer: I don't know what a smoke hollow 26142e is but if it is over 15 inches in diameter and you can cut a hole in it for the plug in it should work. It heats my Weber kettle type smoker was charcoal fired to 225 degrees all day long and can be dialed down from there.I put a heavy aluminum pan directly on top of the element and put wood in it for smoke.I love it.

Answer: I don't know but the dementions of the heating element are listed. Measure carefully, twice! This is by no means "universal" and they charge you to ship it back & a restocking fee as well if it doesn't fit. Buyer beware

Answer: Even if it fits, the element will not last very long... not a reliable product.

Answer: I personally dont know but my advise is measure carefully because the cord does not disconnect from the heating element.

Answer: No.....It will not. It is too long and too wide. I had to return it.

Answer: Not sure it didn't fit my smoker (not universal)

Does the temp adjustment switch only have three setting; low, medium and high, or can you adjust it incrementally anywhere in between? i

Answer: incremental I used a marker to indicate the corresponding temps on my unit

Answer: Yes you can adjust it .

Answer: Hi! You can dial it smoothly anywhere you like. Hope this helps! Also, you may find that the element doesn't seem like it will fit, so just remember that the element is bendable.

Will it fit a Bradley digital four rack?

Answer: Sorry, can't help you with that one. What are the dimensions of the Bradley?

Answer: Not sure, will just have to measure your smoker and compare to deminsions online.

will this fit in a masterbuilt model #20070106?

Answer: good question. too bad no one that has a 20070106 model answered it. Only those with homemade and you didn't ask about homemade....

Answer: Sorry, but I have no idea. I used this in a home-made smoker I built, and it really works great.

Answer: No idea, I used mine for a homemade smoker. Sorry

Answer: I wouldn't know for sure. I put this in an electric smoker that I made.

can you tell me how many amps this draws at full draw? thanks.

Answer: Watts divided by volts equals amps.

Answer: Don't know about the amps, old unit burned out, this one works well as replacement, specs. Should be available thru seller

Answer: ABOUT 14 AMPS

Will this fit a smokey mountain smoker model 32954

Answer: I don't know what we did is measure our bad element and then went by the dimensions on the posting

River country llc i called your number you were supposed to send an analog thermostat, and didn't why doesn't anyone answer at all when i call?

Will this fit Brinkman electric smoker #810-5515-0?

Answer: Probably, with some slight modifications. I modified my Brinkman gas smoker with this electrical component and took me all of 15 mins.

Answer: sorry I'm not familiar with this smoker.

Will this work with the Charbroil grill Patio Caddie?

Could this be made to fit a Masterbuilt tailgate smoker model 20050416?

Answer: I had to enlarge the opening on my cheap "bullet" style smoker, but the control works the legs fit, it heats.

Answer: Not sure. Mine fit in the 30" Masterbuilt.

Answer: This is not a "universal" heating element. Check the detentions carefully. I think they make their money on the restocking fee i was charged when i sent it back.

Answer: Sorry I have no idea what that is so can’t say.

will this work on a Marster built 20070610

Answer: Not sure , be careful didn't work on my Brinkman and they try to charge me restocking fee .

Answer: Not familiar with the model number. Definetly fits the 30" 3 rack analog smoker.

Will this work on a brinkman charcoal smoker conversion

Answer: i'm sure you can make it work. I think it's 1400 watts vs 1500. no big deal. don't be afraid to cut up your brinkman to modify it. it's not like your ever going to sell it. don't forget the lava rocks. the small rectangular foil pans fit nicely in the center of the element. use the small wood chips without soaking and it works perfect.

Answer: I had to modify the bottom of my smoker to get it to fit. The element fit nicely but my smoker diameter was too small to fit the element and the connector. I made the opening large enough to put the metal flanges at the connector on the outside of the smoker box and it worked nicely.

Answer: Hi! I barely got it to fit in a Brinkmann electric smoker. I had to carefully bend the element so it would fit inside. Not sure what you mean by "conversion" but, I once took a Brinkmann charcoal smoker and took one of the pans and put a small element in it, and used it like an electric. It didn't work well because too much air got in from underneath the leg area. If you're thinking about making the element in the charcoal bowl/pan it will be way to big. Hope this helped! Scott

Answer: Universal Replacement Electric Smoker and Grill Heating Element measurement 14.5"x11.5"

Answer: I don't know, but I know that it will not work on a Redi-Smoke Smoker or on an Old Smokey Smoker. Be careful and assure that it is correct for your needs. The vendor will not refund your money eve n though you return the product.

Answer: It fit in my Madterbuilt works good.

Can this be adapted to fit Brinkmann Gourmet Elac smoker, a round one? I need the adjustable temp control. Mine, with the wood flaming, gets too hot!

Answer: If it is an electric smoker you should already have a hole in the side at the bottom. On my Brinkman, the screws didn't match to hold it in but it has small legs but is fairly sturdy even without a permanent mount. I will also not burn large pieces of but smokes small chips ok.

Answer: Didnt fit my smoker.

Answer: Probably not. It might be to big. You'll have to check dimensions.

I am trying to keep the temperature around 220 degrees F. will this unit hold there?

Answer: I have had no trouble holding 225-250. Each time I use it

Answer: Mine did about 225-230 degrees F (onThe "high" setting) in my masterbuilt pro. Keep in mind it was in CA and protected from wind. A thermal blanket may raise that a bit

Answer: I never had a problem, just watch it closely

Will this fit 30" model 18202077 charbroil electric smoker?

Answer: I can answer your question. I bought this element to retro fit it to my homemade wood smoker as an assist heat source to maintain the proper heat temp desired

Answer: I don't know it did fit my master craft smoker with slight adjustments

Answer: I would say yes you will have to modify thru the wall for mounting, but I would say it will work for your needs.

Is there a slightly smaller version of this same product?

Answer: I'm not sure

What are the dimensions of the rectangular box that connects the element to the controller? i have a master forge / landmann brinkmann ebc1102l.

Answer: 23/4" by 1"

would this element work in a model Brinkman 810 - 5290 - c also element that would fit is 116 - 7000 - 0

Answer: It will fit in a cabinet 15" X 12" comfortably.

Will this fit a Master Forge Model 0332739?

Answer: Yes it will fit a Master Forge Model 03327297 but it does not get hot enough to function efficiently.

Answer: The interior of my smoker at the base is 14" X 14". I had to tweak and bend it just a bit. Then it fit in just fine If your is that size or bigger you'll be fine.

Answer: Sorry, can't tell you that. I used it on a Char-broil smoke to convert it to electric. The internal temp would not rise above 100 degrees. Useless for my needs.

How much can I bend this

Answer: It's exactly like a regular element you would find in a standard kitchen oven. That may help you decide how much you think you could bend it. I had no need to bend it for my application so I didn't try but it feels like it could bend a bit without kinking or cracking.

Answer: Go slowly and shape to fit inside the floor of smoker.

Answer: Maybe 20 percent. I didn't have any problems doing it by hand until it fit

Will this work on an older little chief top load electric smoker?

Answer: I'm not familiar with that smoker but the measurements should be attached to heating element, good luck

will this fit old smokey electric smoker?

Answer: I'm not sure if it fits Old Smokey. The dementions are listed & I wish I would have seen that before I ordered. This product is inaccurately labeled "universal replacement" but the only universal aspect of my transaction was the money they charged me to ship it back to them & the restocking fee they charged me & everyone else that is duped into ordering. Buyer beware.

Answer: Works fine. Thermostat sticks out

Will it fit with NO modification & replace the Brinkmann 810-7080-8 Gourmet Electric Smoker? 1500 watt Brinkmann 116-7000-0 Replacement Part

Answer: Just measure what came out against these measurements. I had no problem making a bend here and there (a mini modification) and have been rolling smoke since day one! I knew I could do this by reading other customers reviews, so not uncommon at all to tweak it a tad. I'm very happy with this (as opposed to buying much more expensive ones, or JEEZE no a new smoker.

will this element work in a Cajun elctric grill?

Answer: Hello! Yes, this element will work on the Cajun electric grill. Thank you!

Answer: Not familiar with a Cajun grill. I had to modify my smoker for it to fit. It is a universal replacement for most round smokers.

Does this fit a landmann great smokey mountain series 26 in smoker?

Answer: I would say it would, you will have to make some alterations to the box but should work. Then again pending on the previous element the holes and slot cut thru the box might just fit. This is a very good unit, I use it for a totally different purpose than smoking meat, I use it for a powder coating oven for curing coated products. It maintains the proper heat level very well, I use it at the max of 400 deg for hours on end. Very good product.

Converting a wood burner to electric, how do you place the wood? Directly on the coils? Or in a pan of some sort,

Answer:

Answer: If you place anything directly on the electric coil you run the risk of burning it out. I bought a small smoke box for wood chips and placed it on 2 pieces of angle iron so it sits just slightly above the coil. I also use a torch to ignite part of the chips.

Answer: I put the wood chips in a smoker chip box I found at a local hdw store then just placed directly on the coils. works good for me !

Answer: Put wood in a pan on a rack. Not on the coils

Answer: Best bet is to order some lava rocks to insulate the burner. Water soaked wood will ruin the burner.

This fit for master forge electra smoker model 20071214

Answer: I don't know if it will fit your smoker. I made my smoker out of an old upright stainless refrig and I used this element which works like a dream. It has performed without any problems and it does heat up like advertised. Measure your element then use the info on the advertisement to see if its the same dimensions.

Does this unit actually have a thermostat or is it just a rheostat ?

Answer:

Answer: rheostat!

Answer: No

How wide/length is this

Answer: The coil is manufactured to fit the standard width of the round pits. You may have a minor problem with the mounting screw holes but that can be adjusted easily with a file or drill.

Answer: One of the pictures on the item shows all dimensions. I bought it for my mom.

Will this fit a Dyna-Glo electric grill

Answer: Not sure , it did fit my masterbuilt almost perfect.

What’s the maximum heat people are getting out of this? Does it actually reach 450 degrees as stated in the description?

Answer: I got 195 degrees topped out on my Brinkmann Smoker. That was on an 83 degree day.

Answer: Can't help you with your question, I only use in my smoker and have no need to test the upper limits. I would "suspect" that within a small contained area it could reach the upper limit. Also suspect that if the upper limits were to be maintained over a long period of time and continued use at those higher temps eventually the element would burn itself out. Can only stay "red hot" for so long before metal fatigue sets in.

Answer: Yes it works very well

look to build small powder coat oven wondering if this electric hheating elements wood work needt to reach around 400 degrees in oven

Answer: If it’s small, but won’t heat a large space. I have a medium sized refrigerator I converted to an oven and it barely gets to 400 F when turned on max. I would run 2 if I were you unless it’s a small oven.

Answer: In an enclosed space the element would produce extreme heat! I modified my cooker and have used it repeatedly with temperatures reaching the max on the recast.

Answer: Seriously doubt it...these are usually designed to reach about 250 max for smokers. Heat low & slow

Answer: I am sure mine does not get my small brinkman smoker more than about 300 or less depending on outside temperature.

Product reviews of River Country Universal Replacement Electric Smoker and Grill Heating Element with Adjustable Thermostat ControllerNEW 1500 Watts Higher Heat

jeff : Good value

Great replacement heater

Claire : Perfect Replacement for Masterbuilt 30" Analog Smoker

What a great product! Bought this to replace element on my Masterbuilt Pro 30" Model No. 20070612 analog electric smoker. Fit perfectly. Did require temp removal of right rack support and drilling of 2 holes and purchase of 2 stainless steel bolts with washer and locking nut for about $4 at local Ace Hardware. You will need to remove old element and the element supports in this unit. Took about 5 minutes to install including drill time. Medium setting heated smoker to 250 degrees easily. High setting went well about 325 degrees. Smoked salmon, Portobello mushrooms and 4 ears corn last night. Started smoking chips at 200 degees. Held 250 perfectly. Family loved having smoked food again. Highly recommended if you have basic DIY skills. PS: River Country included a free gift of their Gator Claws which I plan to use next week on an 8# pork butt! Thanks River Country for bringing my Masterbuilt back at less than half the cost of the manufacturer.

D. Gipson : So Far So Good

Replaced the burned out element on my 30" Master-built analog smoker. This replacement actually fit in perfectly without any hardware and the smoke box sits on top of the element making good smoke. Before installing I tested the element and at HIGH is reached +500F. I learned after my first smoke that 225F is between the OFF and LOW settings.

Liz dodge : PERFECT

I AM USING THIS IN A HOMEMADE SMOKER AND IT IS PERFECT! GIVES ME JUST THE RIGHT TEMP TO SMOKE ANY MEAT I THROW IN.

safety man : Good replacement for Masterbuilt

It is working well in my Masterbuilt smoker. No complaints

Beans : Heats well. Easy to install

Easy to install. Maintains heat well installed in master built smoker cabinet. Only issue is finding temperature setting, once set works great.

K. George : Don't deal with the company. Poor customer service

Do not waste your time. This didn't get as hot as expected. When I returned it the company charged me I$24.73 as a restocking fee on a $49.95 item.

Robert P. : Easy installation

This replacement heating element is easy to install. it take quite awhile to heat to 250. Try to avoid opening door as much as possible.

William Santillo : Doesn't fit perfectly but does the job.

I have a Masterbuilt and it supposed to fit it, but the bolts are different places. I made it fit, it works but I I had to make an adjustment.

Lewis Nimety Jr. : Old smoker. New Life!

Not what you are led to believe. Converted my old charcoal smoker. And the seller states the element reaches up to 450 degrees. But it only reaches 225 for me! A 15 amp outlet direct hookup. Sadly disappointed.

thnuke : Works very well.

The designing of this product is very good.

Tommy : Better than buying a new smoker

A good fit for my masterbuilt smoker. Only thing is the to screws for this replacement are on the sides. I used self tapping screws. It only gets a little above 350 degrees on mine. But I like to smoke lower temps and longer for tender meats.

Justin Knoble : The only replacement I can find!

I've been through two of these in a little over two years for my smoker. I actually got electrocuted by the first one when it shorted internally. The max temp can be inconsistent, but I've found ways to deal with it.

It is in fact, the ONLY replacement heating element I've been able to find for my smoker. So I will continue to buy them until I replace it.

Kindle Customer : My obsolete Brinkman Gourmet Smoker is alive again.

Replaced my Brinkman Gourmet Smoker element with this but had to modify both bottom pans with a jigsaw to enable insertion. Then I learned that the temp sensing probe can’t sense and enable controlled temp if it’s sitting outside the heating section. It runs full on all the time just like the original element. So I bought a separate temp sensor/controller and now have a poor man’s Traeger and love it.

Barton K. Hawkins : NEVER GETS TRULY HOT - NO GLOW, TOO SLOW

I wish I could say I love this thing. But a full hour to get a SMALL 30 in cylinder smoker with dome to just 275 degrees...and no higher...and NEVER red hot...never even slightly glowing in the dark of night...the this is just plain awful.

At 1500 W this thing should be CRANKING my little domer to 400 (way to hot for smoking, I know) in 10 minutes (my domer is really only about double the volume of my oven's in the house.

AWFUL.

Lisa : Works great!

Purchased a used Kenmore smoker. After about a month, temp control knob had a short and literally melted. Temp control knob plugged directly into heater element. Since kenmore discontinued the item, we thought we'd have to throw away smoker. Happened to find this universal element. Hubby had to enlarge opening in side of smoker to accomodate new element. Other than that quick and simple modification, installed and works beautifully.

Lewis Nimety Jr. : Old smoker. New Life!

Clarke Kent : Great company to place order.

Complete, very fast communication with my questions. Good company and products too. Enjoy.

William Santillo : Doesn't fit perfectly but does the job.

I have a Masterbuilt and it supposed to fit it, but the bolts are different places. I made it fit, it works but I I had to make an adjustment.

Cynthia Marie Lant : Does NOT fit most like advertised

This is NOT universal! Terrible customer service and retuning was a nightmare!

Claire : Perfect Replacement for Masterbuilt 30" Analog Smoker

safety man : Good replacement for Masterbuilt

It is working well in my Masterbuilt smoker. No complaints

1BigDady : You get what you pay for

I received the product it was easy to install it does what it says it supposed to and maybe a little bit more

Gary Salzman : Fits my 30" Masterbuilt smoker and works as expected

I picked up a used Masterbuilt 30" analog smoker for free because the old element was broken. I was a bit hesitant to buy this element because some reviews said they had to bend it to make it fit their smoker. I took the risk and bought it and was pleasantly surprised to find it fits perfectly and works as promised.

As you can see in the pictures it is larger than the previous element, but still fits within my smoker without needing to bend. I mistakenly thought I needed to bend the legs at first but it turns out I didn't need to do that so I straightened them back out.

The screw holes on this element didn't match what the previous element used so I drilled new holes and attached with new bolts. There is a slight gap above the area where the element goes through the smoker wall which causes moisture to leak through to the outside plug area when smoking. It hasn't been too much of a problem but it does cause me a little concern seeing moisture drip around the electrical thermostat control. I may need to find a way to fill that gap to prevent more leakage.

I've been able to get the smoker up to 325 degrees with this element. I've smoked pork ribs and chicken legs and both smoked up as expected.

Overall I'm very pleased with this purchase. The company even provided a bonus gift - a pair of "Gator Claws" - heavy-duty meat holders/grabbers/slicers/shredders that go over your knuckles. I haven't been able to use them yet, but expect to use them to shred smoked meat someday.

Liz dodge : PERFECT

I AM USING THIS IN A HOMEMADE SMOKER AND IT IS PERFECT! GIVES ME JUST THE RIGHT TEMP TO SMOKE ANY MEAT I THROW IN.

Walter Bieleski : Junk! stay away!

Junk! Could only get a red Brinkman smoker tp 170 degrees on a 80 degree day.

Tom Kaus : Unconventional use

Used in a conversion of an old refrigerator into an oven to cure gun parts coated with Cerakote. Basically a smoker. Was able to get internal temp. over 350 degrees. Only complaint is the temp. control dial is not as precise as I would like, but I'm not using it the way it was intended. Basically I could cook enough pizzas to feed an army all at one time!

Justin Knoble : The only replacement I can find!

Customer232 : works for me.

worked as a replacement for my smoker.

D. Gipson : So Far So Good

Customer232 : works for me.

worked as a replacement for my smoker.

jeff : Good value

Great replacement heater

Clarke Kent : Great company to place order.

Complete, very fast communication with my questions. Good company and products too. Enjoy.

John : Works well in a large Masterbuilt propane smoker as a back up heater.

Added this to my propane smoker as a back up heater because sometimes the flame would blow out while I was away. I did end up insulating the sides and top of the smoker because in the winter it wasn't able to keep it warm.

K. Ayers : Better than the original

Excellent replacement part for the original element of my Brinkmann smoker. The variable control is a huge benefit since the original element ran a bit hot for the type of smoking I do where 'low and slow' is important.
I did have to spend about 2 hours cutting/grinding a hole in the base of my smoker for this element, but totally worth the effort.

Les : Great value.

I like it, a lot. Replaced an older element that wore out. Minor modifications needed for MY application. Really dig the thermostat. Some getting used to but works great.

Lori : Works as advertised

Works great in my homemade smoker!

Diana : Great heating element and temperature controller for electric BBQ!!

With the help of a neighbor, making some adjustments to attach this heating element to my electric barbecue, I can use my barbecue once again!! The heating element with its temperature controller has worked great!!

JamesVT : Nice

Works much better than the original which I was dumb enough to put water on to clean it.
I did have to bend the long part some -- but i love it!!!

safety man : Good replacement for Masterbuilt

It is working well in my Masterbuilt smoker. No complaints

jesse de hoyos : that it works for about 3 times!

the place where it plugs in to the element turns brittle,and breaks off!

Tommy : Better than buying a new smoker

Terry : Element size

Haven't installed yet, but looks like it will be a good fit.

good : Converted my gas smoker to electric. This just doesn't ...

Converted my gas smoker to electric. This just doesn't get very hot and takes a long time to heat up.

JP : Heating Element

I didn't realize that this was a pair of items. Not sure why you would buy two at one time but I have either a spare or one for the next smoker I build.

JP : Heating Element

I didn't realize that this was a pair of items. Not sure why you would buy two at one time but I have either a spare or one for the next smoker I build.

Les : Great value.

I like it, a lot. Replaced an older element that wore out. Minor modifications needed for MY application. Really dig the thermostat. Some getting used to but works great.

ANTHONY J ZARBO : Great price

Prefect fit

K. George : Don't deal with the company. Poor customer service

Do not waste your time. This didn't get as hot as expected. When I returned it the company charged me I$24.73 as a restocking fee on a $49.95 item.

Tommy : Better than buying a new smoker

you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you