6 Service Kits - for 8" 2 mm Hand Impulse Sealer 6 Flat Wire Heat Elements +6 Teflon PTFE Covers FIT PSF-200 - AIE-200 & More review and price compare 2025
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
Product overview
| Brand | Sealer Supply |
| Material | Fiberglass/Metal |
| Color | Brown |
| Item Dimensions LxWxH | 8 x 2 x 1 inches |
| Item Weight | 0.01 Kilograms |
product features
product description
6 Heat wires for 8" x 200mm Hand Impulse Sealer PLUS 6 PTFE covers Fit most 200mm machines measure our wires Ours are 9 1/4" center of eyelet to center TY Fits AIE-200H - FS-200H- PSF-200 - Uline H-163 - Technopak - and most others
product details
- Is Discontinued By Manufacturer : No
- Product Dimensions : 8 x 2 x 1 inches; 0.35 Ounces
- Item model number : RK8H247-10
- Date First Available : June 26, 2013
- Manufacturer : Sealer Supply
- ASIN : B00DNJ5WYY
- Country of Origin : USA
important information
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
Questions about 6 Service Kits - for 8" 2 mm Hand Impulse Sealer 6 Flat Wire Heat Elements +6 Teflon PTFE Covers FIT PSF-200 - AIE-200 & More
Q:
Is the heat wire round or flat. i have a pfs-200. will it fit this type sealer?
Q:
Will these fit a linsnfield 8" impulse heat sealer?
Answer: All 8" sealers
Answer: no sorry
Q:
What is the width of these wires?
Answer: the width is 2mm
Answer: about 1/8"
Answer: 2mm Regards sealersupply.com
Q:
what is the hole-to-hole length of the wire?
Answer: 9 1/4" Center to center of hole
Answer: middle of hole to middle of hole is 9 1/4''
Answer: As I recall they fit a standard 8" sealer. One mount on the sealer is spring loaded so you have about 1/4" of play. I don't have the wires handy so I can't measure them.
Q:
Approx how long will these last? 100 uses? 1,000 uses? 2500 uses? i know it varies, but i would like an estimate. thank you
Answer: I probably seal 500 or so products per time and maybe after 12 or 15 times I have to replace one. If I keep the Teflon cover strip clean and intact (move it around if it gets a burnt spot so the Teflon strip is intact over the "hot spot") the element lasts a lot longer. Took me a few times to figure that out.
Answer: It will do 100, but it depends on how well you treat it.
Answer: Hmm.... I guess it depends on your heating settings? One lasts me 3-4 months, and I use it every day.
Answer: each heater strip will last approximately 500 bags. hope this helps
Q:
I have a midwest pacific mp-8 impulse sealer. Will these tapes and wires work for my unit.
Answer: The midwest pacific mp-8 sealer appears to be nearly identical to the u-line 8 inch sealer. I'm pretty sure these service kits would be interchangeable.
Q:
I Have a MEC 200H Impulse sealer 8" and wondering if this would fit my unit?
Answer: I have lots of dofferent 8" models. This kit works on them all.
Answer: I looked up your sealer. From what I can tell I would say yes.
Product reviews of 6 Service Kits - for 8" 2 mm Hand Impulse Sealer 6 Flat Wire Heat Elements +6 Teflon PTFE Covers FIT PSF-200 - AIE-200 & More
B. Mack : Did what is expected.
Did everything I expected.
Abby : Five Stars
Works Great!
Doug V : yay
work great
Abby : Five Stars
Works Great!
Penny L. Hotzel : Five Stars
Product as described and was recvd timely.
Danny : Five Stars
just what i needed
Kindle Customer : One Star
all that was shipped was an empty cardboard sleeve. no product
Rich Shufro : work well some adjustment to size
These heater last a long time so a batch like this will last a really long time. We did have to cut a bit to make things fit just right. No problem and they work fine.
jbrew2001 : A good buy. Have you noticed that the heating elements ...
A good buy.
Have you noticed that the heating elements fail at the ends - near the connectors? They seem to heat up much more at these places, getting red-hot, which makes them fail. I tried preventing this by sandwiching a thin piece of brass shim stock about 3/8" square over the element right next to the connectors to act as a heat sink. I just bend the little square of brass in half and use pliers to squeeze it onto the heating element. I suppose you could use a little piece of copper flashing to do the same thing - maybe even better. So far, it seems to work really well.
Have you noticed that the heating elements fail at the ends - near the connectors? They seem to heat up much more at these places, getting red-hot, which makes them fail. I tried preventing this by sandwiching a thin piece of brass shim stock about 3/8" square over the element right next to the connectors to act as a heat sink. I just bend the little square of brass in half and use pliers to squeeze it onto the heating element. I suppose you could use a little piece of copper flashing to do the same thing - maybe even better. So far, it seems to work really well.
tammy reeves : Five Stars
Quick delivery and exactly as shown
jbrew2001 : A good buy. Have you noticed that the heating elements ...
A good buy.
Have you noticed that the heating elements fail at the ends - near the connectors? They seem to heat up much more at these places, getting red-hot, which makes them fail. I tried preventing this by sandwiching a thin piece of brass shim stock about 3/8" square over the element right next to the connectors to act as a heat sink. I just bend the little square of brass in half and use pliers to squeeze it onto the heating element. I suppose you could use a little piece of copper flashing to do the same thing - maybe even better. So far, it seems to work really well.
Have you noticed that the heating elements fail at the ends - near the connectors? They seem to heat up much more at these places, getting red-hot, which makes them fail. I tried preventing this by sandwiching a thin piece of brass shim stock about 3/8" square over the element right next to the connectors to act as a heat sink. I just bend the little square of brass in half and use pliers to squeeze it onto the heating element. I suppose you could use a little piece of copper flashing to do the same thing - maybe even better. So far, it seems to work really well.
jbrew2001 : A good buy. Have you noticed that the heating elements ...
A good buy.
Have you noticed that the heating elements fail at the ends - near the connectors? They seem to heat up much more at these places, getting red-hot, which makes them fail. I tried preventing this by sandwiching a thin piece of brass shim stock about 3/8" square over the element right next to the connectors to act as a heat sink. I just bend the little square of brass in half and use pliers to squeeze it onto the heating element. I suppose you could use a little piece of copper flashing to do the same thing - maybe even better. So far, it seems to work really well.
Have you noticed that the heating elements fail at the ends - near the connectors? They seem to heat up much more at these places, getting red-hot, which makes them fail. I tried preventing this by sandwiching a thin piece of brass shim stock about 3/8" square over the element right next to the connectors to act as a heat sink. I just bend the little square of brass in half and use pliers to squeeze it onto the heating element. I suppose you could use a little piece of copper flashing to do the same thing - maybe even better. So far, it seems to work really well.
Cman : Five Stars
Works perfect in my heat sealer.
tammy reeves : Five Stars
Quick delivery and exactly as shown
Brad Dean : Just when I needed them, they came in
It was gear to get what I needed, when I needed it. So for that thank you and I am sure I will order again
GREGORY HS. : Five Stars
it works!
Grown Heeyah : Five Stars
excellent worked perfect
Sam S. : As advertised
What else is there to say- they fit, they work, they are much cheaper than Uline. Will buy again when needed
T. K. : Better than the replacement wires that came with my sealer!
Very good price and they fit my heat sealer perfectly. Came in separate envelopes. Fast delivery. Good product. They were more durable and lasted longer than the original wires that came with the sealer.
Henri Eastman : https://www.amazon.com/dp/B00DNJ5WYY/ref=cm_cr_ryp_prd_ttl_sol_1
Received the service kits. They do work and don't burn out. I am very satisfied with the fair price and the quality of the product.
T. K. : Better than the replacement wires that came with my sealer!
Very good price and they fit my heat sealer perfectly. Came in separate envelopes. Fast delivery. Good product. They were more durable and lasted longer than the original wires that came with the sealer.
you can compare the product price from Costco, wayfair, bestbuy, lowes, target, homedepot, Walmart, ebay, amazon to find the best price for you
-
MapHouse NOAA Chart 11426 Estero Bay to Lemon Bay, Including Charlotte Harbor;Continuation of Peace River: 47.82" X 32.94" Paper Chart review and price compare -
EverTrust(TM) 25m 3 Layers Monofilament Gill Fishing Net with Float Fish Trap Rede De Pesca Fishing Network review and price compare
-
Kitchen accessories 1 Sealing Machine with 5 Pieces Sealing Clips Portable Mini Handheld Heat Sealer for Food Storage Plastic Bags Snack Fresh Bag Heat Seal by Magnet Quick and Safe Easy to Use (Pink) review and price compare
-
Synthetic Media NOAA Chart 11548: Pamlico Sound Western Part review and price compare
-
6 Service Kits - for 8" 2 mm Hand Impulse Sealer 6 Flat Wire Heat Elements +6 Teflon PTFE Covers FIT PSF-200 - AIE-200 & More review and price compare
-
10 Pack Holographic Adhesive Film Flash Fishing Lure Prism Tape Scale Skin Lure Hard Bait Stickers Reflective Film DIY Art Craft Fly Tying Tool review and price compare
-
Synthetic Media NOAA Chart 18686: Pfeiffer Point to Cypress Point review and price compare
-
Vingvo Pva Water Soluble Net, 3 Optional Width Fishing Water Soluble Net, Lake Sea Fishing For Wild Fishing Pool(44Mm) review and price compare
-
Nesco Gardenmaster Food dehydrator, White & Snackmaster Clean dehydrator screen, One Size, White review and price compare
-
Mold Craft 6200B-12 Little Bird review and price compare
-
Pressure Sensitive Torque Activated Seals Cap Liners - 48 mm (1.89") -100 PCS -Made in USA- for Glass & Plastic Bottles & Containers - No Induction Sealer Needed review and price compare
-
Hudson River-North (Kingston-Coxsackie) Fishing Map review and price compare
-
WAGA Small Crayfish Carp Fish Mesh Nylon Dip Fish Net Fishing Trap Net review and price compare
-
Synthetic Media NOAA Chart 14973: Apostle Islands, including Chequamegan Bay; Bayfield Harbor; Pikes Bay Harbor; La Pointe Harbor review and price compare
-
Zkenyao-net Fishing Trap Nylon Mesh Cast Fishery Accessories, Load Fish Bag Tackle Fishing Net, Materials review and price compare
-
Kona Wood Smoker Tube & Smoking Pellets Set - Hot & Cold Smoke for Charcoal, Electric, Gas & All BBQ Grills - Stainless Steel 12 Inch Hexagon & 14 ounces of Premium Blend Hardwood review and price compare
-
HAOX Nylon Fishing Net, Fish Net, Lightweight Sturdy Well-Manufactured for Pond Fish Tank review and price compare
-
Smokehouse Products Big Chief Replacement Grill, Metal, One Size (9890-984-0000) review and price compare
-
Lake Murray Fishing Map review and price compare
© 2025 fishing.qciss.net All Rights Reserved. fishinghub copyrights